西门子s7通信也是一种tcp通信，比slmp通信多两次协商。参考slmp通信代码，使用myrtumst作为数据配置。用slmp和fins通信类似的代码格式，完成s7 tcpc的代码。

通信之前需要COTP协商

uint8_t comm1[] =
		{ 0x03, 0x00, 0x00, 0x16, 0x11, 0xE0, 0x00, 0x00, 0x00, 0x01, 0x00, 0xC0, 0x01, 0x0A, 0xC1, 0x02, 0x01, 0x00, 0xC2, 0x02, 0x03, 0x02 };

和S7Comm协商
uint8_t comm2[] = { 0x03, 0x00, 0x00, 0x19, 0x02, 0xF0, 0x80, 0x32, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x01,
		0x00, 0x01, 0x01, 0xE0 };

如果你也不知道西门子 s7 通信 协商报文的回应，那先不管报文回应吧，后续再完善，我目前不知道，有回应就算通过。

两次协商之后。就可以开始通信了


void to_big_endian_16(uint16_t value, uint8_t *dest) {
	dest[0] = (uint8_t) (value >> 8);  // 高字节
	dest[1] = (uint8_t) (value & 0xFF); // 低字节
}

void to_big_endian_24(uint32_t value, uint8_t *dest) {
	dest[0] = (uint8_t) (value >> 16); // 最高字节
	dest[1] = (uint8_t) (value >> 8);  // 次高字节
	dest[2] = (uint8_t) (value & 0xFF); // 最低字节
}

typedef union {
	uint8_t frame[31];
	struct {
		uint8_t padding1[23];
		uint8_t read_size[2];
		uint8_t db_id[2];
		uint8_t padding2[1];
		uint8_t start_address[3];

	};
} s7ReadFrame;

typedef union {
	uint8_t frame[1024];
	struct {
		uint8_t padding1[2];
		uint8_t frame_size[2];
		uint8_t padding2[11];
		uint8_t dataframe_size[2];
		uint8_t padding3[6];
		uint8_t data_size[2];
		uint8_t db_id[2];
		uint8_t padding4[1];
		uint8_t start_address[3];
		uint8_t padding5[2];
		uint8_t databyte_size_t8[2];
		uint8_t data[800];
	};
} s7WriteFrame;




s7ReadFrame readframe = { .frame = { 0x03, 0x00, 0x00, 0x1f, 0x02, 0xf0, 0x80, 0x32, 0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0x0e, 0x00, 0x00, 0x04, 0x01,
		0x12, 0x0A, 0x10, 0x02, 0x00, 0x02, 0x00, 0x01, 0x84, 0x00, 0x00, 0x00 } };



s7WriteFrame writeframe = { .frame = { 0x03, 0x00, 0x00, 0x29, 0x02, 0xf0, 0x80, 0x32, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x0e, 0x00, 0x0a, 0x05,
		0x01, 0x12, 0x0a, 0x10, 0x02, 0x00, 0x06, 0x00, 0x01, 0x84, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 } };




读取报文准备

to_big_endian_16(get_register(DBID1_IDX), readframe.db_id);
						to_big_endian_24(get_register(START1_IDX) * 8, readframe.start_address);
						to_big_endian_16(get_register(SIZE1_IDX) * 2, readframe.read_size);
						memcpy(sendbuf, readframe.frame, read_size);
						sendbufsize = read_size;


写入准备报文

uint16_t prepare_write_frame(uint8_t *write, uint16_t writebyte_size) {
	if (writebyte_size == 0) {
		return 0;
	}
	uint16_t frame_size = 35 + writebyte_size;
	to_big_endian_16(frame_size, writeframe.frame_size);
	to_big_endian_16(4 + writebyte_size, writeframe.dataframe_size);
	to_big_endian_16(writebyte_size, writeframe.data_size);
	to_big_endian_16(get_register(DBID2_IDX), writeframe.db_id);
	to_big_endian_24(get_register(START2_IDX) * 8, writeframe.start_address);
	to_big_endian_16(writebyte_size * 8, writeframe.databyte_size_t8);
	memcpy(writeframe.data, write, writebyte_size);
	return frame_size;
}

写入的回应不用管，读取的回应要解析到本地。

看完需求不着急写，有疑问先和我确定，写的话写入到s7tcpmaster.c。 假设你是专业的编程专家，确保代码正确。
