11
This commit is contained in:
commit
53c85e94af
393 files changed
+141844
No files matched your search
@@ -0,0 +1,52 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file dma.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the dma.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __DMA_H__
|
||||
#define __DMA_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* DMA memory to memory transfer handles -------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_DMA_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __DMA_H__ */
|
||||
|
||||
@@ -0,0 +1,49 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file gpio.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the gpio.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __GPIO_H__
|
||||
#define __GPIO_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_GPIO_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /*__ GPIO_H__ */
|
||||
|
||||
@@ -0,0 +1,201 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.h
|
||||
* @brief : Header for main.c file.
|
||||
* This file contains the common defines of the application.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2024 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __MAIN_H
|
||||
#define __MAIN_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f1xx_hal.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void Error_Handler(void);
|
||||
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
#define in13_Pin GPIO_PIN_4
|
||||
#define in13_GPIO_Port GPIOE
|
||||
#define in14_Pin GPIO_PIN_5
|
||||
#define in14_GPIO_Port GPIOE
|
||||
#define in15_Pin GPIO_PIN_6
|
||||
#define in15_GPIO_Port GPIOE
|
||||
#define in16_Pin GPIO_PIN_13
|
||||
#define in16_GPIO_Port GPIOC
|
||||
#define in17_Pin GPIO_PIN_14
|
||||
#define in17_GPIO_Port GPIOC
|
||||
#define in18_Pin GPIO_PIN_15
|
||||
#define in18_GPIO_Port GPIOC
|
||||
#define in19_Pin GPIO_PIN_0
|
||||
#define in19_GPIO_Port GPIOC
|
||||
#define in20_Pin GPIO_PIN_1
|
||||
#define in20_GPIO_Port GPIOC
|
||||
#define in21_Pin GPIO_PIN_2
|
||||
#define in21_GPIO_Port GPIOC
|
||||
#define in22_Pin GPIO_PIN_3
|
||||
#define in22_GPIO_Port GPIOC
|
||||
#define in23_Pin GPIO_PIN_0
|
||||
#define in23_GPIO_Port GPIOA
|
||||
#define in24_Pin GPIO_PIN_1
|
||||
#define in24_GPIO_Port GPIOA
|
||||
#define run_lamp_Pin GPIO_PIN_2
|
||||
#define run_lamp_GPIO_Port GPIOA
|
||||
#define comm_lamp_Pin GPIO_PIN_3
|
||||
#define comm_lamp_GPIO_Port GPIOA
|
||||
#define w5500cs_Pin GPIO_PIN_4
|
||||
#define w5500cs_GPIO_Port GPIOA
|
||||
#define w5500rst_Pin GPIO_PIN_4
|
||||
#define w5500rst_GPIO_Port GPIOC
|
||||
#define o24_Pin GPIO_PIN_0
|
||||
#define o24_GPIO_Port GPIOB
|
||||
#define o23_Pin GPIO_PIN_1
|
||||
#define o23_GPIO_Port GPIOB
|
||||
#define o22_Pin GPIO_PIN_2
|
||||
#define o22_GPIO_Port GPIOB
|
||||
#define o21_Pin GPIO_PIN_7
|
||||
#define o21_GPIO_Port GPIOE
|
||||
#define o20_Pin GPIO_PIN_8
|
||||
#define o20_GPIO_Port GPIOE
|
||||
#define o19_Pin GPIO_PIN_9
|
||||
#define o19_GPIO_Port GPIOE
|
||||
#define o18_Pin GPIO_PIN_10
|
||||
#define o18_GPIO_Port GPIOE
|
||||
#define o17_Pin GPIO_PIN_11
|
||||
#define o17_GPIO_Port GPIOE
|
||||
#define o16_Pin GPIO_PIN_12
|
||||
#define o16_GPIO_Port GPIOE
|
||||
#define o15_Pin GPIO_PIN_13
|
||||
#define o15_GPIO_Port GPIOE
|
||||
#define o14_Pin GPIO_PIN_14
|
||||
#define o14_GPIO_Port GPIOE
|
||||
#define o13_Pin GPIO_PIN_15
|
||||
#define o13_GPIO_Port GPIOE
|
||||
#define o12_Pin GPIO_PIN_10
|
||||
#define o12_GPIO_Port GPIOB
|
||||
#define o11_Pin GPIO_PIN_11
|
||||
#define o11_GPIO_Port GPIOB
|
||||
#define o10_Pin GPIO_PIN_12
|
||||
#define o10_GPIO_Port GPIOB
|
||||
#define o9_Pin GPIO_PIN_13
|
||||
#define o9_GPIO_Port GPIOB
|
||||
#define o8_Pin GPIO_PIN_14
|
||||
#define o8_GPIO_Port GPIOB
|
||||
#define o7_Pin GPIO_PIN_15
|
||||
#define o7_GPIO_Port GPIOB
|
||||
#define o6_Pin GPIO_PIN_8
|
||||
#define o6_GPIO_Port GPIOD
|
||||
#define o5_Pin GPIO_PIN_9
|
||||
#define o5_GPIO_Port GPIOD
|
||||
#define o4_Pin GPIO_PIN_10
|
||||
#define o4_GPIO_Port GPIOD
|
||||
#define o3_Pin GPIO_PIN_11
|
||||
#define o3_GPIO_Port GPIOD
|
||||
#define o2_Pin GPIO_PIN_12
|
||||
#define o2_GPIO_Port GPIOD
|
||||
#define o1_Pin GPIO_PIN_13
|
||||
#define o1_GPIO_Port GPIOD
|
||||
#define g2_Pin GPIO_PIN_14
|
||||
#define g2_GPIO_Port GPIOD
|
||||
#define f2_Pin GPIO_PIN_15
|
||||
#define f2_GPIO_Port GPIOD
|
||||
#define e2_Pin GPIO_PIN_6
|
||||
#define e2_GPIO_Port GPIOC
|
||||
#define c2_Pin GPIO_PIN_7
|
||||
#define c2_GPIO_Port GPIOC
|
||||
#define b2_Pin GPIO_PIN_8
|
||||
#define b2_GPIO_Port GPIOC
|
||||
#define a2_Pin GPIO_PIN_9
|
||||
#define a2_GPIO_Port GPIOC
|
||||
#define re485_Pin GPIO_PIN_8
|
||||
#define re485_GPIO_Port GPIOA
|
||||
#define rstbtn_Pin GPIO_PIN_11
|
||||
#define rstbtn_GPIO_Port GPIOA
|
||||
#define a1_Pin GPIO_PIN_12
|
||||
#define a1_GPIO_Port GPIOC
|
||||
#define b1_Pin GPIO_PIN_0
|
||||
#define b1_GPIO_Port GPIOD
|
||||
#define c1_Pin GPIO_PIN_1
|
||||
#define c1_GPIO_Port GPIOD
|
||||
#define e1_Pin GPIO_PIN_2
|
||||
#define e1_GPIO_Port GPIOD
|
||||
#define f1_Pin GPIO_PIN_3
|
||||
#define f1_GPIO_Port GPIOD
|
||||
#define g1_Pin GPIO_PIN_4
|
||||
#define g1_GPIO_Port GPIOD
|
||||
#define in12_Pin GPIO_PIN_5
|
||||
#define in12_GPIO_Port GPIOD
|
||||
#define in11_Pin GPIO_PIN_6
|
||||
#define in11_GPIO_Port GPIOD
|
||||
#define in10_Pin GPIO_PIN_7
|
||||
#define in10_GPIO_Port GPIOD
|
||||
#define in9_Pin GPIO_PIN_3
|
||||
#define in9_GPIO_Port GPIOB
|
||||
#define in8_Pin GPIO_PIN_4
|
||||
#define in8_GPIO_Port GPIOB
|
||||
#define in7_Pin GPIO_PIN_5
|
||||
#define in7_GPIO_Port GPIOB
|
||||
#define in6_Pin GPIO_PIN_6
|
||||
#define in6_GPIO_Port GPIOB
|
||||
#define in5_Pin GPIO_PIN_7
|
||||
#define in5_GPIO_Port GPIOB
|
||||
#define in4_Pin GPIO_PIN_8
|
||||
#define in4_GPIO_Port GPIOB
|
||||
#define in3_Pin GPIO_PIN_9
|
||||
#define in3_GPIO_Port GPIOB
|
||||
#define in2_Pin GPIO_PIN_0
|
||||
#define in2_GPIO_Port GPIOE
|
||||
#define in1_Pin GPIO_PIN_1
|
||||
#define in1_GPIO_Port GPIOE
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __MAIN_H */
|
||||
@@ -0,0 +1,52 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file spi.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the spi.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __SPI_H__
|
||||
#define __SPI_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
extern SPI_HandleTypeDef hspi1;
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_SPI1_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __SPI_H__ */
|
||||
|
||||
@@ -0,0 +1,391 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f1xx_hal_conf.h
|
||||
* @brief HAL configuration file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F1xx_HAL_CONF_H
|
||||
#define __STM32F1xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
|
||||
#define HAL_MODULE_ENABLED
|
||||
/*#define HAL_ADC_MODULE_ENABLED */
|
||||
/*#define HAL_CRYP_MODULE_ENABLED */
|
||||
/*#define HAL_CAN_MODULE_ENABLED */
|
||||
/*#define HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
/*#define HAL_CEC_MODULE_ENABLED */
|
||||
/*#define HAL_CORTEX_MODULE_ENABLED */
|
||||
/*#define HAL_CRC_MODULE_ENABLED */
|
||||
/*#define HAL_DAC_MODULE_ENABLED */
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
/*#define HAL_ETH_MODULE_ENABLED */
|
||||
/*#define HAL_FLASH_MODULE_ENABLED */
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
/*#define HAL_I2C_MODULE_ENABLED */
|
||||
/*#define HAL_I2S_MODULE_ENABLED */
|
||||
/*#define HAL_IRDA_MODULE_ENABLED */
|
||||
/*#define HAL_IWDG_MODULE_ENABLED */
|
||||
/*#define HAL_NOR_MODULE_ENABLED */
|
||||
/*#define HAL_NAND_MODULE_ENABLED */
|
||||
/*#define HAL_PCCARD_MODULE_ENABLED */
|
||||
/*#define HAL_PCD_MODULE_ENABLED */
|
||||
/*#define HAL_HCD_MODULE_ENABLED */
|
||||
/*#define HAL_PWR_MODULE_ENABLED */
|
||||
/*#define HAL_RCC_MODULE_ENABLED */
|
||||
/*#define HAL_RTC_MODULE_ENABLED */
|
||||
/*#define HAL_SD_MODULE_ENABLED */
|
||||
/*#define HAL_MMC_MODULE_ENABLED */
|
||||
/*#define HAL_SDRAM_MODULE_ENABLED */
|
||||
/*#define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
#define HAL_SPI_MODULE_ENABLED
|
||||
/*#define HAL_SRAM_MODULE_ENABLED */
|
||||
#define HAL_TIM_MODULE_ENABLED
|
||||
#define HAL_UART_MODULE_ENABLED
|
||||
/*#define HAL_USART_MODULE_ENABLED */
|
||||
/*#define HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_EXTI_MODULE_ENABLED
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
|
||||
/* ########################## Oscillator Values adaptation ####################*/
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature. */
|
||||
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
* This value is used by the UART, RTC HAL module to compute the system frequency
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY 15U /*!< tick interrupt priority (lowest by default) */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 1U
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
|
||||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
|
||||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
|
||||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* ################## Ethernet peripheral configuration ##################### */
|
||||
|
||||
/* Section 1 : Ethernet peripheral configuration */
|
||||
|
||||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||
#define MAC_ADDR0 2U
|
||||
#define MAC_ADDR1 0U
|
||||
#define MAC_ADDR2 0U
|
||||
#define MAC_ADDR3 0U
|
||||
#define MAC_ADDR4 0U
|
||||
#define MAC_ADDR5 0U
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB 8U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
/* Section 2: PHY configuration section */
|
||||
|
||||
/* DP83848_PHY_ADDRESS Address*/
|
||||
#define DP83848_PHY_ADDRESS 0x01U
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY 0x000000FFU
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY 0x00000FFFU
|
||||
|
||||
#define PHY_READ_TO 0x0000FFFFU
|
||||
#define PHY_WRITE_TO 0x0000FFFFU
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
|
||||
|
||||
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 0U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||
#include "Legacy/stm32f1xx_hal_can_legacy.h"
|
||||
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CEC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_cec.h"
|
||||
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_pccard.h"
|
||||
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F1xx_HAL_CONF_H */
|
||||
|
||||
@@ -0,0 +1,70 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f1xx_it.h
|
||||
* @brief This file contains the headers of the interrupt handlers.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2024 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F1xx_IT_H
|
||||
#define __STM32F1xx_IT_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void NMI_Handler(void);
|
||||
void HardFault_Handler(void);
|
||||
void MemManage_Handler(void);
|
||||
void BusFault_Handler(void);
|
||||
void UsageFault_Handler(void);
|
||||
void SVC_Handler(void);
|
||||
void DebugMon_Handler(void);
|
||||
void PendSV_Handler(void);
|
||||
void SysTick_Handler(void);
|
||||
void DMA1_Channel4_IRQHandler(void);
|
||||
void DMA1_Channel5_IRQHandler(void);
|
||||
void USART1_IRQHandler(void);
|
||||
void TIM6_IRQHandler(void);
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F1xx_IT_H */
|
||||
@@ -0,0 +1,52 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file tim.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the tim.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __TIM_H__
|
||||
#define __TIM_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
extern TIM_HandleTypeDef htim6;
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_TIM6_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __TIM_H__ */
|
||||
|
||||
@@ -0,0 +1,52 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usart.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the usart.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USART_H__
|
||||
#define __USART_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
extern UART_HandleTypeDef huart1;
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_USART1_UART_Init(uint32_t BaudRate);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __USART_H__ */
|
||||
|
||||
@@ -0,0 +1,58 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file dma.c
|
||||
* @brief This file provides code for the configuration
|
||||
* of all the requested memory to memory DMA transfers.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "dma.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/*----------------------------------------------------------------------------*/
|
||||
/* Configure DMA */
|
||||
/*----------------------------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/**
|
||||
* Enable DMA controller clock
|
||||
*/
|
||||
void MX_DMA_Init(void)
|
||||
{
|
||||
|
||||
/* DMA controller clock enable */
|
||||
__HAL_RCC_DMA1_CLK_ENABLE();
|
||||
|
||||
/* DMA interrupt init */
|
||||
/* DMA1_Channel4_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA1_Channel4_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(DMA1_Channel4_IRQn);
|
||||
/* DMA1_Channel5_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA1_Channel5_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(DMA1_Channel5_IRQn);
|
||||
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
@@ -0,0 +1,172 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file gpio.c
|
||||
* @brief This file provides code for the configuration
|
||||
* of all used GPIO pins.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "gpio.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/*----------------------------------------------------------------------------*/
|
||||
/* Configure GPIO */
|
||||
/*----------------------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/** Configure pins as
|
||||
* Analog
|
||||
* Input
|
||||
* Output
|
||||
* EVENT_OUT
|
||||
* EXTI
|
||||
*/
|
||||
void MX_GPIO_Init(void)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOE_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOA, run_lamp_Pin|comm_lamp_Pin|w5500cs_Pin|re485_Pin, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(w5500rst_GPIO_Port, w5500rst_Pin, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOB, o24_Pin|o23_Pin|o22_Pin|o12_Pin
|
||||
|o11_Pin|o10_Pin|o9_Pin|o8_Pin
|
||||
|o7_Pin, GPIO_PIN_SET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOE, o21_Pin|o20_Pin|o19_Pin|o18_Pin
|
||||
|o17_Pin|o16_Pin|o15_Pin|o14_Pin
|
||||
|o13_Pin, GPIO_PIN_SET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOD, o6_Pin|o5_Pin|o4_Pin|o3_Pin
|
||||
|o2_Pin|o1_Pin, GPIO_PIN_SET);
|
||||
|
||||
/*Configure GPIO pins : in13_Pin in14_Pin in15_Pin in2_Pin
|
||||
in1_Pin */
|
||||
GPIO_InitStruct.Pin = in13_Pin|in14_Pin|in15_Pin|in2_Pin
|
||||
|in1_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : in16_Pin in17_Pin in18_Pin in19_Pin
|
||||
in20_Pin in21_Pin in22_Pin e2_Pin
|
||||
c2_Pin b2_Pin a2_Pin a1_Pin */
|
||||
GPIO_InitStruct.Pin = in16_Pin|in17_Pin|in18_Pin|in19_Pin
|
||||
|in20_Pin|in21_Pin|in22_Pin|e2_Pin
|
||||
|c2_Pin|b2_Pin|a2_Pin|a1_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : in23_Pin in24_Pin rstbtn_Pin */
|
||||
GPIO_InitStruct.Pin = in23_Pin|in24_Pin|rstbtn_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : run_lamp_Pin comm_lamp_Pin re485_Pin */
|
||||
GPIO_InitStruct.Pin = run_lamp_Pin|comm_lamp_Pin|re485_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : w5500cs_Pin */
|
||||
GPIO_InitStruct.Pin = w5500cs_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(w5500cs_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : w5500rst_Pin */
|
||||
GPIO_InitStruct.Pin = w5500rst_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(w5500rst_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : o24_Pin o23_Pin o22_Pin o12_Pin
|
||||
o11_Pin o10_Pin o9_Pin o8_Pin
|
||||
o7_Pin */
|
||||
GPIO_InitStruct.Pin = o24_Pin|o23_Pin|o22_Pin|o12_Pin
|
||||
|o11_Pin|o10_Pin|o9_Pin|o8_Pin
|
||||
|o7_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : o21_Pin o20_Pin o19_Pin o18_Pin
|
||||
o17_Pin o16_Pin o15_Pin o14_Pin
|
||||
o13_Pin */
|
||||
GPIO_InitStruct.Pin = o21_Pin|o20_Pin|o19_Pin|o18_Pin
|
||||
|o17_Pin|o16_Pin|o15_Pin|o14_Pin
|
||||
|o13_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : o6_Pin o5_Pin o4_Pin o3_Pin
|
||||
o2_Pin o1_Pin */
|
||||
GPIO_InitStruct.Pin = o6_Pin|o5_Pin|o4_Pin|o3_Pin
|
||||
|o2_Pin|o1_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : g2_Pin f2_Pin b1_Pin c1_Pin
|
||||
e1_Pin f1_Pin g1_Pin in12_Pin
|
||||
in11_Pin in10_Pin */
|
||||
GPIO_InitStruct.Pin = g2_Pin|f2_Pin|b1_Pin|c1_Pin
|
||||
|e1_Pin|f1_Pin|g1_Pin|in12_Pin
|
||||
|in11_Pin|in10_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : in9_Pin in8_Pin in7_Pin in6_Pin
|
||||
in5_Pin in4_Pin in3_Pin */
|
||||
GPIO_InitStruct.Pin = in9_Pin|in8_Pin|in7_Pin|in6_Pin
|
||||
|in5_Pin|in4_Pin|in3_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
@@ -0,0 +1,626 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2024 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "dma.h"
|
||||
#include "spi.h"
|
||||
#include "tim.h"
|
||||
#include "usart.h"
|
||||
#include "gpio.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
#include "stdio.h"
|
||||
#include "w5500/w5500_port.h"
|
||||
#include "w5500/modbusSlave.h"
|
||||
#include "w5500/modbus_crc.h"
|
||||
#include "w5500/loopback.h"
|
||||
|
||||
#include "w5500/httpParser.h"
|
||||
#include "w5500/httpServer.h"
|
||||
#include "w5500/webpages.h"
|
||||
#include "w5500/httpUtil.h"
|
||||
#include "w5500/slmpMaster.h"
|
||||
|
||||
#include "w5500/modbusRtuMaster.h"
|
||||
#include "w5500/loopback2.h"
|
||||
#include "w5500/rtuMaster.h"
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
#define FLASH_LAST_PAGE_512 0x0807F800
|
||||
#define IP_ADDR 20
|
||||
#define run_lamp_on HAL_GPIO_WritePin(run_lamp_GPIO_Port, run_lamp_Pin, GPIO_PIN_RESET)
|
||||
#define run_lamp_off HAL_GPIO_WritePin(run_lamp_GPIO_Port, run_lamp_Pin, GPIO_PIN_SET)
|
||||
#define comm_lamp_on HAL_GPIO_WritePin(comm_lamp_GPIO_Port, comm_lamp_Pin, GPIO_PIN_RESET)
|
||||
#define comm_lamp_off HAL_GPIO_WritePin(comm_lamp_GPIO_Port, comm_lamp_Pin, GPIO_PIN_SET)
|
||||
|
||||
#define RE_SET HAL_GPIO_WritePin(re485_GPIO_Port, re485_Pin, GPIO_PIN_SET)
|
||||
#define RE_RESET HAL_GPIO_WritePin(re485_GPIO_Port, re485_Pin, GPIO_PIN_RESET)
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
uint8_t commType = 0; // 0 slmp, 1 omr
|
||||
_Bool comm1, comm2;
|
||||
uint16_t comm_cnt, prev_cnt;
|
||||
uint16_t slmpTimeout = 0;
|
||||
uint16_t slmpTimegap = 1;
|
||||
|
||||
uint16_t slmp_send_loop = 0;
|
||||
|
||||
uint8_t w5500_rx[1024];
|
||||
uint8_t uart_rx[255];
|
||||
uint8_t uart_tx[255];
|
||||
uint8_t local_ip[4];
|
||||
uint8_t slmp_ip[4];
|
||||
uint16_t slmp_port;
|
||||
|
||||
uint16_t in1_word = 0;
|
||||
uint16_t in2_word = 0;
|
||||
uint16_t in3_word = 0;
|
||||
uint16_t in4_word = 0;
|
||||
uint16_t out_word1 = 0;
|
||||
uint16_t out_word2 = 0;
|
||||
|
||||
////////////////////////////////////////////////////////// 新增变量 //////////////////////////
|
||||
rtumST readST[10] = { { .slave_id = 0, .slave_address = 1, .plc_address = 2, .size = 3 }, { .slave_id = 4, .slave_address = 5, .plc_address = 6, .size = 7 }, {
|
||||
.slave_id = 8, .slave_address = 9, .plc_address = 10, .size = 11 }, { .slave_id = 12, .slave_address = 13, .plc_address = 14, .size = 15 }, {
|
||||
.slave_id = 16, .slave_address = 17, .plc_address = 18, .size = 19 }, { .slave_id = 20, .slave_address = 21, .plc_address = 22, .size = 23 }, {
|
||||
.slave_id = 24, .slave_address = 25, .plc_address = 26, .size = 27 }, { .slave_id = 28, .slave_address = 29, .plc_address = 30, .size = 31 }, {
|
||||
.slave_id = 32, .slave_address = 33, .plc_address = 34, .size = 35 }, { .slave_id = 36, .slave_address = 37, .plc_address = 38, .size = 39 } };
|
||||
|
||||
rtumST writeST[10] = { { .slave_id = 40, .slave_address = 41, .plc_address = 42, .size = 43 }, { .slave_id = 44, .slave_address = 45, .plc_address = 46, .size =
|
||||
47 }, { .slave_id = 48, .slave_address = 49, .plc_address = 50, .size = 51 }, { .slave_id = 52, .slave_address = 53, .plc_address = 54, .size = 55 }, {
|
||||
.slave_id = 56, .slave_address = 57, .plc_address = 58, .size = 59 }, { .slave_id = 60, .slave_address = 61, .plc_address = 62, .size = 63 }, {
|
||||
.slave_id = 64, .slave_address = 65, .plc_address = 66, .size = 67 }, { .slave_id = 68, .slave_address = 69, .plc_address = 70, .size = 71 }, {
|
||||
.slave_id = 72, .slave_address = 73, .plc_address = 74, .size = 75 }, { .slave_id = 76, .slave_address = 77, .plc_address = 78, .size = 79 } };
|
||||
|
||||
rtumST myRtumST[20];
|
||||
RtuMaster master = { .localStartIdx = 1400 };
|
||||
|
||||
////////////////////////////////////////////////////////// 新增变量 //////////////////////////
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
#ifdef __GNUC__
|
||||
#define PUTCHAR_PROTOTYPE int __io_putchar(int ch)
|
||||
#else
|
||||
#define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)
|
||||
#endif
|
||||
PUTCHAR_PROTOTYPE {
|
||||
HAL_UART_Transmit(&huart1, (uint8_t*) &ch, 1, 0xFFFF);
|
||||
return ch;
|
||||
}
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/**
|
||||
* uint16_t data_array[] = {0x1234, 0x5678, 0x9ABC};
|
||||
* write_flash_u16(data_array, 3);
|
||||
*/
|
||||
void write_flash_u16(uint16_t *data, uint32_t length, uint32_t user_save_flash) {
|
||||
HAL_FLASH_Unlock();
|
||||
|
||||
FLASH_EraseInitTypeDef EraseInitStruct;
|
||||
uint32_t SectorError;
|
||||
|
||||
// 擦除扇区
|
||||
EraseInitStruct.TypeErase = TYPEERASE_PAGES;
|
||||
EraseInitStruct.PageAddress = user_save_flash;
|
||||
EraseInitStruct.NbPages = 1;
|
||||
|
||||
if (HAL_FLASHEx_Erase(&EraseInitStruct, &SectorError) != HAL_OK) {
|
||||
// 擦除错误处理
|
||||
HAL_FLASH_Lock();
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
// 写入数据
|
||||
for (uint32_t i = 0; i < length; i += 2) {
|
||||
uint32_t word = 0;
|
||||
|
||||
if (i + 1 < length) {
|
||||
// 将两�??????? u16 组合成一�??????? u32
|
||||
word = ((uint32_t) data[i + 1] << 16) | data[i];
|
||||
} else {
|
||||
// 如果数据长度是奇数,�???????后一�??????? u16 �???????要单独处�???????
|
||||
word = data[i];
|
||||
}
|
||||
|
||||
// 写入组合好的 32 位数�???????
|
||||
if (HAL_FLASH_Program(TYPEPROGRAM_WORD, user_save_flash, word) != HAL_OK) {
|
||||
HAL_FLASH_Lock();
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
user_save_flash += 4; // 4 字节为一个单位,移动到下�???????个地�???????
|
||||
}
|
||||
|
||||
HAL_FLASH_Lock(); // 写完后锁�??????? Flash
|
||||
}
|
||||
|
||||
/**
|
||||
* uint16_t data_array[3];
|
||||
* read_flash_u16(data_array, 3);
|
||||
*/
|
||||
void read_flash_u16(uint16_t *data, uint32_t length, uint32_t user_save_flash) {
|
||||
|
||||
for (uint32_t i = 0; i < length; i += 2) {
|
||||
uint32_t word = *(uint32_t*) user_save_flash; // �??????? Flash 中读�??????? 32 位数�???????
|
||||
|
||||
// 拆分 32 位数据为两个 16 位数�???????
|
||||
data[i] = (uint16_t) (word & 0xFFFF); // �??????? 16 �???????
|
||||
if (i + 1 < length) {
|
||||
data[i + 1] = (uint16_t) ((word >> 16) & 0xFFFF); // �??????? 16 �???????
|
||||
}
|
||||
|
||||
user_save_flash += 4; // 每次读取后,移动到下�???????�??????? 32 位地�???????
|
||||
}
|
||||
}
|
||||
|
||||
union {
|
||||
uint16_t u16;
|
||||
uint8_t u8[2];
|
||||
} u16_u8;
|
||||
|
||||
void load_flash() {
|
||||
uint16_t data_array[10];
|
||||
read_flash_u16(data_array, 10, FLASH_LAST_PAGE_512);
|
||||
set_register_range(20, 10, data_array);
|
||||
}
|
||||
|
||||
_Bool check_ipv4(uint8_t ip[4]) {
|
||||
for (int i = 0; i < 4; i++) {
|
||||
if (ip[i] >= 255 || ip[i] == 0) {
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
//////////////////////////////////////////////////////////// ↓定时器(TIME6=1MS↓ /////////////////////////////////////////////
|
||||
uint16_t timeout_beat, rtu_master_timeout, rstbtn_timeout, runbeat;
|
||||
void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) {
|
||||
if (htim == &htim6) {
|
||||
|
||||
if (master.timeout < 0xffff) {
|
||||
master.timeout++;
|
||||
}
|
||||
|
||||
if (slmpTimeout < 0xffff) {
|
||||
slmpTimeout++;
|
||||
}
|
||||
|
||||
if (HAL_GPIO_ReadPin(rstbtn_GPIO_Port, rstbtn_Pin) == GPIO_PIN_RESET) {
|
||||
if (rstbtn_timeout < 0xffff) {
|
||||
rstbtn_timeout++;
|
||||
} else {
|
||||
rstbtn_timeout = 0;
|
||||
}
|
||||
}
|
||||
|
||||
if (runbeat < 1000) { //控制运行指示灯间隔1秒闪烁
|
||||
runbeat++;
|
||||
} else {
|
||||
runbeat = 0;
|
||||
HAL_GPIO_TogglePin(run_lamp_GPIO_Port, run_lamp_Pin);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
uint16_t flash_reset[100];
|
||||
|
||||
void reset_button() {
|
||||
if (rstbtn_timeout > 3000) {
|
||||
memset(flash_reset, 0xFF, 200);
|
||||
Write_To_Flash_uint16(EDIT_FLASH_ADDRESS, flash_reset, 100);
|
||||
rstbtn_timeout = 0;
|
||||
}
|
||||
}
|
||||
//////////////////////////////////////////////////////////// ↑定时器↑ /////////////////////////////////////////////
|
||||
|
||||
//////////////////////////////////////////////////////////// ↓485主站↓ /////////////////////////////////////////////
|
||||
|
||||
void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) {
|
||||
if (huart == &huart1) {
|
||||
RE_RESET;
|
||||
HAL_UARTEx_ReceiveToIdle_DMA(&huart1, master.txbuf, 512);
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) {
|
||||
if (huart == &huart1) {
|
||||
master.rxdone = 1;
|
||||
master.rxsize = Size;
|
||||
}
|
||||
}
|
||||
|
||||
//////////////////////////////////////////////////////////// ↑485主站↑ /////////////////////////////////////////////
|
||||
|
||||
int getBit(int num, int n) {
|
||||
return (num & (1 << n)) >> n;
|
||||
}
|
||||
|
||||
void map_out(uint16_t startAddress) {
|
||||
out_word1 = get_register(startAddress);
|
||||
out_word2 = get_register(startAddress + 1);
|
||||
|
||||
(getBit(out_word1, 0)) ? HAL_GPIO_WritePin(o1_GPIO_Port, o1_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o1_GPIO_Port, o1_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word1, 1)) ? HAL_GPIO_WritePin(o2_GPIO_Port, o2_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o2_GPIO_Port, o2_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word1, 2)) ? HAL_GPIO_WritePin(o3_GPIO_Port, o3_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o3_GPIO_Port, o3_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word1, 3)) ? HAL_GPIO_WritePin(o4_GPIO_Port, o4_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o4_GPIO_Port, o4_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word1, 4)) ? HAL_GPIO_WritePin(o5_GPIO_Port, o5_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o5_GPIO_Port, o5_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word1, 5)) ? HAL_GPIO_WritePin(o6_GPIO_Port, o6_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o6_GPIO_Port, o6_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word1, 6)) ? HAL_GPIO_WritePin(o7_GPIO_Port, o7_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o7_GPIO_Port, o7_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word1, 7)) ? HAL_GPIO_WritePin(o8_GPIO_Port, o8_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o8_GPIO_Port, o8_Pin, GPIO_PIN_SET);
|
||||
|
||||
(getBit(out_word1, 8)) ? HAL_GPIO_WritePin(o9_GPIO_Port, o9_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o9_GPIO_Port, o9_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word1, 9)) ? HAL_GPIO_WritePin(o10_GPIO_Port, o10_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o10_GPIO_Port, o10_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word1, 10)) ? HAL_GPIO_WritePin(o11_GPIO_Port, o11_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o11_GPIO_Port, o11_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word1, 11)) ? HAL_GPIO_WritePin(o12_GPIO_Port, o12_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o12_GPIO_Port, o12_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word1, 12)) ? HAL_GPIO_WritePin(o13_GPIO_Port, o13_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o13_GPIO_Port, o13_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word1, 13)) ? HAL_GPIO_WritePin(o14_GPIO_Port, o14_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o14_GPIO_Port, o14_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word1, 14)) ? HAL_GPIO_WritePin(o15_GPIO_Port, o15_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o15_GPIO_Port, o15_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word1, 15)) ? HAL_GPIO_WritePin(o16_GPIO_Port, o16_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o16_GPIO_Port, o16_Pin, GPIO_PIN_SET);
|
||||
|
||||
(getBit(out_word2, 0)) ? HAL_GPIO_WritePin(o17_GPIO_Port, o17_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o17_GPIO_Port, o17_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word2, 1)) ? HAL_GPIO_WritePin(o18_GPIO_Port, o18_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o18_GPIO_Port, o18_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word2, 2)) ? HAL_GPIO_WritePin(o19_GPIO_Port, o19_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o19_GPIO_Port, o19_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word2, 3)) ? HAL_GPIO_WritePin(o20_GPIO_Port, o20_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o20_GPIO_Port, o20_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word2, 4)) ? HAL_GPIO_WritePin(o21_GPIO_Port, o21_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o21_GPIO_Port, o21_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word2, 5)) ? HAL_GPIO_WritePin(o22_GPIO_Port, o22_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o22_GPIO_Port, o22_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word2, 6)) ? HAL_GPIO_WritePin(o23_GPIO_Port, o23_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o23_GPIO_Port, o23_Pin, GPIO_PIN_SET);
|
||||
(getBit(out_word2, 7)) ? HAL_GPIO_WritePin(o24_GPIO_Port, o24_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o24_GPIO_Port, o24_Pin, GPIO_PIN_SET);
|
||||
|
||||
}
|
||||
void map_in(uint16_t startAddress) {
|
||||
(HAL_GPIO_ReadPin(in1_GPIO_Port, in1_Pin) == 1) ? (in1_word &= ~(1 << 0)) : (in1_word |= (1 << 0));
|
||||
(HAL_GPIO_ReadPin(in2_GPIO_Port, in2_Pin) == 1) ? (in1_word &= ~(1 << 1)) : (in1_word |= (1 << 1));
|
||||
(HAL_GPIO_ReadPin(in3_GPIO_Port, in3_Pin) == 1) ? (in1_word &= ~(1 << 2)) : (in1_word |= (1 << 2));
|
||||
(HAL_GPIO_ReadPin(in4_GPIO_Port, in4_Pin) == 1) ? (in1_word &= ~(1 << 3)) : (in1_word |= (1 << 3));
|
||||
(HAL_GPIO_ReadPin(in5_GPIO_Port, in5_Pin) == 1) ? (in1_word &= ~(1 << 4)) : (in1_word |= (1 << 4));
|
||||
(HAL_GPIO_ReadPin(in6_GPIO_Port, in6_Pin) == 1) ? (in1_word &= ~(1 << 5)) : (in1_word |= (1 << 5));
|
||||
(HAL_GPIO_ReadPin(in7_GPIO_Port, in7_Pin) == 1) ? (in1_word &= ~(1 << 6)) : (in1_word |= (1 << 6));
|
||||
(HAL_GPIO_ReadPin(in8_GPIO_Port, in8_Pin) == 1) ? (in1_word &= ~(1 << 7)) : (in1_word |= (1 << 7));
|
||||
|
||||
(HAL_GPIO_ReadPin(in9_GPIO_Port, in9_Pin) == 1) ? (in1_word &= ~(1 << 8)) : (in1_word |= (1 << 8));
|
||||
(HAL_GPIO_ReadPin(in10_GPIO_Port, in10_Pin) == 1) ? (in1_word &= ~(1 << 9)) : (in1_word |= (1 << 9));
|
||||
(HAL_GPIO_ReadPin(in11_GPIO_Port, in11_Pin) == 1) ? (in1_word &= ~(1 << 10)) : (in1_word |= (1 << 10));
|
||||
(HAL_GPIO_ReadPin(in12_GPIO_Port, in12_Pin) == 1) ? (in1_word &= ~(1 << 11)) : (in1_word |= (1 << 11));
|
||||
(HAL_GPIO_ReadPin(in13_GPIO_Port, in13_Pin) == 1) ? (in1_word &= ~(1 << 12)) : (in1_word |= (1 << 12));
|
||||
(HAL_GPIO_ReadPin(in14_GPIO_Port, in14_Pin) == 1) ? (in1_word &= ~(1 << 13)) : (in1_word |= (1 << 13));
|
||||
(HAL_GPIO_ReadPin(in15_GPIO_Port, in15_Pin) == 1) ? (in1_word &= ~(1 << 14)) : (in1_word |= (1 << 14));
|
||||
(HAL_GPIO_ReadPin(in16_GPIO_Port, in16_Pin) == 1) ? (in1_word &= ~(1 << 15)) : (in1_word |= (1 << 15));
|
||||
|
||||
(HAL_GPIO_ReadPin(in17_GPIO_Port, in17_Pin) == 1) ? (in2_word &= ~(1 << 0)) : (in2_word |= (1 << 0));
|
||||
(HAL_GPIO_ReadPin(in18_GPIO_Port, in18_Pin) == 1) ? (in2_word &= ~(1 << 1)) : (in2_word |= (1 << 1));
|
||||
(HAL_GPIO_ReadPin(in19_GPIO_Port, in19_Pin) == 1) ? (in2_word &= ~(1 << 2)) : (in2_word |= (1 << 2));
|
||||
(HAL_GPIO_ReadPin(in20_GPIO_Port, in20_Pin) == 1) ? (in2_word &= ~(1 << 3)) : (in2_word |= (1 << 3));
|
||||
(HAL_GPIO_ReadPin(in21_GPIO_Port, in21_Pin) == 1) ? (in2_word &= ~(1 << 4)) : (in2_word |= (1 << 4));
|
||||
(HAL_GPIO_ReadPin(in22_GPIO_Port, in22_Pin) == 1) ? (in2_word &= ~(1 << 5)) : (in2_word |= (1 << 5));
|
||||
(HAL_GPIO_ReadPin(in23_GPIO_Port, in23_Pin) == 1) ? (in2_word &= ~(1 << 6)) : (in2_word |= (1 << 6));
|
||||
(HAL_GPIO_ReadPin(in24_GPIO_Port, in24_Pin) == 1) ? (in2_word &= ~(1 << 7)) : (in2_word |= (1 << 7));
|
||||
|
||||
(HAL_GPIO_ReadPin(a1_GPIO_Port, a1_Pin) == 1) ? (in3_word &= ~(1 << 0)) : (in3_word |= (1 << 0));
|
||||
(HAL_GPIO_ReadPin(b1_GPIO_Port, b1_Pin) == 1) ? (in3_word &= ~(1 << 1)) : (in3_word |= (1 << 1));
|
||||
(HAL_GPIO_ReadPin(c1_GPIO_Port, c1_Pin) == 1) ? (in3_word &= ~(1 << 2)) : (in3_word |= (1 << 2));
|
||||
(HAL_GPIO_ReadPin(e1_GPIO_Port, e1_Pin) == 1) ? (in3_word &= ~(1 << 3)) : (in3_word |= (1 << 3));
|
||||
(HAL_GPIO_ReadPin(f1_GPIO_Port, f1_Pin) == 1) ? (in3_word &= ~(1 << 4)) : (in3_word |= (1 << 4));
|
||||
(HAL_GPIO_ReadPin(g1_GPIO_Port, g1_Pin) == 1) ? (in3_word &= ~(1 << 5)) : (in3_word |= (1 << 5));
|
||||
|
||||
(HAL_GPIO_ReadPin(a2_GPIO_Port, a2_Pin) == 1) ? (in4_word &= ~(1 << 0)) : (in4_word |= (1 << 0));
|
||||
(HAL_GPIO_ReadPin(b2_GPIO_Port, b2_Pin) == 1) ? (in4_word &= ~(1 << 1)) : (in4_word |= (1 << 1));
|
||||
(HAL_GPIO_ReadPin(c2_GPIO_Port, c2_Pin) == 1) ? (in4_word &= ~(1 << 2)) : (in4_word |= (1 << 2));
|
||||
(HAL_GPIO_ReadPin(e2_GPIO_Port, e2_Pin) == 1) ? (in4_word &= ~(1 << 3)) : (in4_word |= (1 << 3));
|
||||
(HAL_GPIO_ReadPin(f2_GPIO_Port, f2_Pin) == 1) ? (in4_word &= ~(1 << 4)) : (in4_word |= (1 << 4));
|
||||
(HAL_GPIO_ReadPin(g2_GPIO_Port, g2_Pin) == 1) ? (in4_word &= ~(1 << 5)) : (in4_word |= (1 << 5));
|
||||
|
||||
set_register_noSave(startAddress, in1_word);
|
||||
set_register_noSave(startAddress + 1, in2_word);
|
||||
set_register_noSave(startAddress + 2, in3_word);
|
||||
set_register_noSave(startAddress + 3, in4_word);
|
||||
|
||||
}
|
||||
|
||||
void Read_From_Flash(uint32_t startAddress, uint16_t *buffer, uint32_t numElements) {
|
||||
for (uint32_t i = 0; i < numElements; i++) {
|
||||
buffer[i] = *(__IO uint16_t*) (startAddress + (i * 2));
|
||||
}
|
||||
}
|
||||
|
||||
void combineMyRtumST() {
|
||||
for (int i = 0; i < 10; i++) {
|
||||
myRtumST[i * 2] = readST[i];
|
||||
myRtumST[i * 2 + 1] = writeST[i];
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void) {
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
MX_DMA_Init();
|
||||
MX_SPI1_Init();
|
||||
// MX_USART1_UART_Init();
|
||||
MX_TIM6_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
// 初始化保存数据
|
||||
uint16_t readDataBuffer[FLASH_SAVE_SIZE];
|
||||
Read_From_Flash(EDIT_FLASH_ADDRESS, readDataBuffer, FLASH_SAVE_SIZE);
|
||||
set_register_range(0, FLASH_SAVE_SIZE, readDataBuffer);
|
||||
|
||||
//加载参数
|
||||
slmp_port = get_register(85);
|
||||
slmp_ip[0] = get_register(81);
|
||||
slmp_ip[1] = get_register(82);
|
||||
slmp_ip[2] = get_register(83);
|
||||
slmp_ip[3] = get_register(84);
|
||||
if (slmp_ip[0] == 0xff || slmp_ip[1] == 0xff || slmp_ip[2] == 0xff || slmp_ip[3] == 0xff) {
|
||||
slmp_ip[0] = 192;
|
||||
slmp_ip[1] = 168;
|
||||
slmp_ip[2] = 1;
|
||||
slmp_ip[3] = 9;
|
||||
set_register(81, 192);
|
||||
set_register(82, 168);
|
||||
set_register(83, 1);
|
||||
set_register(84, 9);
|
||||
}
|
||||
|
||||
if (slmp_port == 0xffff) {
|
||||
set_register(85, 4096);
|
||||
}
|
||||
|
||||
if (get_register(91) == 0xffff) {
|
||||
set_register(91, 0);
|
||||
}
|
||||
commType = get_register(91);
|
||||
|
||||
local_ip[0] = get_register(86);
|
||||
local_ip[1] = get_register(87);
|
||||
local_ip[2] = get_register(88);
|
||||
local_ip[3] = get_register(89);
|
||||
if (local_ip[0] == 0xff || local_ip[1] == 0xff || local_ip[2] == 0xff || local_ip[3] == 0xff) {
|
||||
local_ip[0] = 192;
|
||||
local_ip[1] = 168;
|
||||
local_ip[2] = 1;
|
||||
local_ip[3] = 14;
|
||||
|
||||
set_register(86, 192);
|
||||
set_register(87, 168);
|
||||
set_register(88, 1);
|
||||
set_register(89, 14);
|
||||
}
|
||||
|
||||
if (get_register(90) == 0xffff) {
|
||||
set_register(90, 120);
|
||||
}
|
||||
set_slaveid(get_register(90));
|
||||
|
||||
if (get_register(80) == 0xffff) {
|
||||
set_register(80, 0);
|
||||
}
|
||||
|
||||
uint32_t BaudRate = 0;
|
||||
switch (get_register(80)) { // 80号地址波特率
|
||||
case 0:
|
||||
BaudRate = 9600;
|
||||
break;
|
||||
case 1:
|
||||
BaudRate = 14400;
|
||||
break;
|
||||
case 2:
|
||||
BaudRate = 19200;
|
||||
break;
|
||||
case 3:
|
||||
BaudRate = 38400;
|
||||
break;
|
||||
case 4:
|
||||
BaudRate = 56000;
|
||||
break;
|
||||
case 5:
|
||||
BaudRate = 57600;
|
||||
break;
|
||||
case 6:
|
||||
BaudRate = 115200;
|
||||
break;
|
||||
default:
|
||||
BaudRate = 128000;
|
||||
break;
|
||||
}
|
||||
|
||||
for (uint16_t i = 0; i < 80; i++) {
|
||||
if (get_register(i) == 0xffff) {
|
||||
set_register(i, 0);
|
||||
}
|
||||
}
|
||||
|
||||
// 网页
|
||||
httpServer_init();
|
||||
reg_httpServer_cbfunc(NVIC_SystemReset, NULL);
|
||||
reg_httpServer_webContent((uint8_t*) "index.html", (uint8_t*) rtu_master);
|
||||
reg_httpServer_webContent((uint8_t*) "ajax.js", (uint8_t*) w5x00web_ajax_js);
|
||||
|
||||
//初始化硬件
|
||||
HAL_TIM_Base_Start_IT(&htim6);
|
||||
w5500_init(local_ip);
|
||||
MX_USART1_UART_Init(BaudRate);
|
||||
HAL_GPIO_WritePin(run_lamp_GPIO_Port, run_lamp_Pin, GPIO_PIN_RESET);
|
||||
combineMyRtumST();
|
||||
updateMyRtumST(myRtumST);
|
||||
setupRtumST(readST, writeST);
|
||||
master.localSlaveId = get_slaveid();
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1) {
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
set_register(109, HAL_GPIO_ReadPin(run_lamp_GPIO_Port, run_lamp_Pin) ? 1 : 0);
|
||||
map_in(100);
|
||||
map_out(110);
|
||||
RTU_Master_Loop(&master, myRtumST);
|
||||
prev_cnt = comm_cnt;
|
||||
loopback_tcps_modbus(0, w5500_rx, 502, &comm_cnt, &comm1);
|
||||
|
||||
if (slmp_send_loop < 2) {
|
||||
slmp_send_loop++;
|
||||
} else {
|
||||
slmp_send_loop = 0;
|
||||
if (commType == 0) {
|
||||
loopback_tcpc_slmp(1, slmp_ip, slmp_port, &comm_cnt, &comm2);
|
||||
} else if (commType == 1) {
|
||||
loopback_udpc_omrfins(1, slmp_ip, slmp_port, local_ip[3], &comm_cnt, &comm2);
|
||||
}
|
||||
}
|
||||
|
||||
if (comm_cnt > 100) {
|
||||
HAL_GPIO_TogglePin(comm_lamp_GPIO_Port, comm_lamp_Pin);
|
||||
comm_cnt = 0;
|
||||
}
|
||||
|
||||
if (!comm1 && !comm2) {
|
||||
HAL_GPIO_WritePin(comm_lamp_GPIO_Port, comm_lamp_Pin, GPIO_PIN_SET);
|
||||
}
|
||||
|
||||
web_loop();
|
||||
reset_button();
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void) {
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = { 0 };
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 };
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Enables the Clock Security System
|
||||
*/
|
||||
HAL_RCC_EnableCSS();
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void) {
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
__disable_irq();
|
||||
while (1) {
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
@@ -0,0 +1,122 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file spi.c
|
||||
* @brief This file provides code for the configuration
|
||||
* of the SPI instances.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "spi.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
SPI_HandleTypeDef hspi1;
|
||||
|
||||
/* SPI1 init function */
|
||||
void MX_SPI1_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN SPI1_Init 0 */
|
||||
|
||||
/* USER CODE END SPI1_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN SPI1_Init 1 */
|
||||
|
||||
/* USER CODE END SPI1_Init 1 */
|
||||
hspi1.Instance = SPI1;
|
||||
hspi1.Init.Mode = SPI_MODE_MASTER;
|
||||
hspi1.Init.Direction = SPI_DIRECTION_2LINES;
|
||||
hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
|
||||
hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
|
||||
hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
|
||||
hspi1.Init.NSS = SPI_NSS_SOFT;
|
||||
hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
|
||||
hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
||||
hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
|
||||
hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
||||
hspi1.Init.CRCPolynomial = 10;
|
||||
if (HAL_SPI_Init(&hspi1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN SPI1_Init 2 */
|
||||
|
||||
/* USER CODE END SPI1_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
void HAL_SPI_MspInit(SPI_HandleTypeDef* spiHandle)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(spiHandle->Instance==SPI1)
|
||||
{
|
||||
/* USER CODE BEGIN SPI1_MspInit 0 */
|
||||
|
||||
/* USER CODE END SPI1_MspInit 0 */
|
||||
/* SPI1 clock enable */
|
||||
__HAL_RCC_SPI1_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
/**SPI1 GPIO Configuration
|
||||
PA5 ------> SPI1_SCK
|
||||
PA6 ------> SPI1_MISO
|
||||
PA7 ------> SPI1_MOSI
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_7;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_6;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN SPI1_MspInit 1 */
|
||||
|
||||
/* USER CODE END SPI1_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* spiHandle)
|
||||
{
|
||||
|
||||
if(spiHandle->Instance==SPI1)
|
||||
{
|
||||
/* USER CODE BEGIN SPI1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END SPI1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_SPI1_CLK_DISABLE();
|
||||
|
||||
/**SPI1 GPIO Configuration
|
||||
PA5 ------> SPI1_SCK
|
||||
PA6 ------> SPI1_MISO
|
||||
PA7 ------> SPI1_MOSI
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
|
||||
|
||||
/* USER CODE BEGIN SPI1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END SPI1_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
@@ -0,0 +1,86 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f1xx_hal_msp.c
|
||||
* @brief This file provides code for the MSP Initialization
|
||||
* and de-Initialization codes.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2024 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Define */
|
||||
|
||||
/* USER CODE END Define */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Macro */
|
||||
|
||||
/* USER CODE END Macro */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* External functions --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ExternalFunctions */
|
||||
|
||||
/* USER CODE END ExternalFunctions */
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
/**
|
||||
* Initializes the Global MSP.
|
||||
*/
|
||||
void HAL_MspInit(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN MspInit 0 */
|
||||
|
||||
/* USER CODE END MspInit 0 */
|
||||
|
||||
__HAL_RCC_AFIO_CLK_ENABLE();
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
/* System interrupt init*/
|
||||
|
||||
/** NOJTAG: JTAG-DP Disabled and SW-DP Enabled
|
||||
*/
|
||||
__HAL_AFIO_REMAP_SWJ_NOJTAG();
|
||||
|
||||
/* USER CODE BEGIN MspInit 1 */
|
||||
|
||||
/* USER CODE END MspInit 1 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
@@ -0,0 +1,263 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f1xx_it.c
|
||||
* @brief Interrupt Service Routines.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2024 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "stm32f1xx_it.h"
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
extern TIM_HandleTypeDef htim6;
|
||||
extern DMA_HandleTypeDef hdma_usart1_rx;
|
||||
extern DMA_HandleTypeDef hdma_usart1_tx;
|
||||
extern UART_HandleTypeDef huart1;
|
||||
/* USER CODE BEGIN EV */
|
||||
|
||||
/* USER CODE END EV */
|
||||
|
||||
/******************************************************************************/
|
||||
/* Cortex-M3 Processor Interruption and Exception Handlers */
|
||||
/******************************************************************************/
|
||||
/**
|
||||
* @brief This function handles Non maskable interrupt.
|
||||
*/
|
||||
void NMI_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 0 */
|
||||
HAL_RCC_NMI_IRQHandler();
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END NonMaskableInt_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Hard fault interrupt.
|
||||
*/
|
||||
void HardFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN HardFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END HardFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_HardFault_IRQn 0 */
|
||||
/* USER CODE END W1_HardFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Memory management fault.
|
||||
*/
|
||||
void MemManage_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN MemoryManagement_IRQn 0 */
|
||||
|
||||
/* USER CODE END MemoryManagement_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
|
||||
/* USER CODE END W1_MemoryManagement_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Prefetch fault, memory access fault.
|
||||
*/
|
||||
void BusFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN BusFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END BusFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_BusFault_IRQn 0 */
|
||||
/* USER CODE END W1_BusFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Undefined instruction or illegal state.
|
||||
*/
|
||||
void UsageFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN UsageFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END UsageFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_UsageFault_IRQn 0 */
|
||||
/* USER CODE END W1_UsageFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System service call via SWI instruction.
|
||||
*/
|
||||
void SVC_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SVCall_IRQn 0 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 0 */
|
||||
/* USER CODE BEGIN SVCall_IRQn 1 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Debug monitor.
|
||||
*/
|
||||
void DebugMon_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 0 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 0 */
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 1 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pendable request for system service.
|
||||
*/
|
||||
void PendSV_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN PendSV_IRQn 0 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 0 */
|
||||
/* USER CODE BEGIN PendSV_IRQn 1 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System tick timer.
|
||||
*/
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SysTick_IRQn 0 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 0 */
|
||||
HAL_IncTick();
|
||||
/* USER CODE BEGIN SysTick_IRQn 1 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 1 */
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
/* STM32F1xx Peripheral Interrupt Handlers */
|
||||
/* Add here the Interrupt Handlers for the used peripherals. */
|
||||
/* For the available peripheral interrupt handler names, */
|
||||
/* please refer to the startup file (startup_stm32f1xx.s). */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @brief This function handles DMA1 channel4 global interrupt.
|
||||
*/
|
||||
void DMA1_Channel4_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DMA1_Channel4_IRQn 0 */
|
||||
|
||||
/* USER CODE END DMA1_Channel4_IRQn 0 */
|
||||
HAL_DMA_IRQHandler(&hdma_usart1_tx);
|
||||
/* USER CODE BEGIN DMA1_Channel4_IRQn 1 */
|
||||
|
||||
/* USER CODE END DMA1_Channel4_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles DMA1 channel5 global interrupt.
|
||||
*/
|
||||
void DMA1_Channel5_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DMA1_Channel5_IRQn 0 */
|
||||
|
||||
/* USER CODE END DMA1_Channel5_IRQn 0 */
|
||||
HAL_DMA_IRQHandler(&hdma_usart1_rx);
|
||||
/* USER CODE BEGIN DMA1_Channel5_IRQn 1 */
|
||||
|
||||
/* USER CODE END DMA1_Channel5_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles USART1 global interrupt.
|
||||
*/
|
||||
void USART1_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN USART1_IRQn 0 */
|
||||
|
||||
/* USER CODE END USART1_IRQn 0 */
|
||||
HAL_UART_IRQHandler(&huart1);
|
||||
/* USER CODE BEGIN USART1_IRQn 1 */
|
||||
|
||||
/* USER CODE END USART1_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles TIM6 global interrupt.
|
||||
*/
|
||||
void TIM6_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN TIM6_IRQn 0 */
|
||||
|
||||
/* USER CODE END TIM6_IRQn 0 */
|
||||
HAL_TIM_IRQHandler(&htim6);
|
||||
/* USER CODE BEGIN TIM6_IRQn 1 */
|
||||
|
||||
/* USER CODE END TIM6_IRQn 1 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
@@ -0,0 +1,176 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file syscalls.c
|
||||
* @author Auto-generated by STM32CubeIDE
|
||||
* @brief STM32CubeIDE Minimal System calls file
|
||||
*
|
||||
* For more information about which c-functions
|
||||
* need which of these lowlevel functions
|
||||
* please consult the Newlib libc-manual
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2020-2024 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes */
|
||||
#include <sys/stat.h>
|
||||
#include <stdlib.h>
|
||||
#include <errno.h>
|
||||
#include <stdio.h>
|
||||
#include <signal.h>
|
||||
#include <time.h>
|
||||
#include <sys/time.h>
|
||||
#include <sys/times.h>
|
||||
|
||||
|
||||
/* Variables */
|
||||
extern int __io_putchar(int ch) __attribute__((weak));
|
||||
extern int __io_getchar(void) __attribute__((weak));
|
||||
|
||||
|
||||
char *__env[1] = { 0 };
|
||||
char **environ = __env;
|
||||
|
||||
|
||||
/* Functions */
|
||||
void initialise_monitor_handles()
|
||||
{
|
||||
}
|
||||
|
||||
int _getpid(void)
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
|
||||
int _kill(int pid, int sig)
|
||||
{
|
||||
(void)pid;
|
||||
(void)sig;
|
||||
errno = EINVAL;
|
||||
return -1;
|
||||
}
|
||||
|
||||
void _exit (int status)
|
||||
{
|
||||
_kill(status, -1);
|
||||
while (1) {} /* Make sure we hang here */
|
||||
}
|
||||
|
||||
__attribute__((weak)) int _read(int file, char *ptr, int len)
|
||||
{
|
||||
(void)file;
|
||||
int DataIdx;
|
||||
|
||||
for (DataIdx = 0; DataIdx < len; DataIdx++)
|
||||
{
|
||||
*ptr++ = __io_getchar();
|
||||
}
|
||||
|
||||
return len;
|
||||
}
|
||||
|
||||
__attribute__((weak)) int _write(int file, char *ptr, int len)
|
||||
{
|
||||
(void)file;
|
||||
int DataIdx;
|
||||
|
||||
for (DataIdx = 0; DataIdx < len; DataIdx++)
|
||||
{
|
||||
__io_putchar(*ptr++);
|
||||
}
|
||||
return len;
|
||||
}
|
||||
|
||||
int _close(int file)
|
||||
{
|
||||
(void)file;
|
||||
return -1;
|
||||
}
|
||||
|
||||
|
||||
int _fstat(int file, struct stat *st)
|
||||
{
|
||||
(void)file;
|
||||
st->st_mode = S_IFCHR;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int _isatty(int file)
|
||||
{
|
||||
(void)file;
|
||||
return 1;
|
||||
}
|
||||
|
||||
int _lseek(int file, int ptr, int dir)
|
||||
{
|
||||
(void)file;
|
||||
(void)ptr;
|
||||
(void)dir;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int _open(char *path, int flags, ...)
|
||||
{
|
||||
(void)path;
|
||||
(void)flags;
|
||||
/* Pretend like we always fail */
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _wait(int *status)
|
||||
{
|
||||
(void)status;
|
||||
errno = ECHILD;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _unlink(char *name)
|
||||
{
|
||||
(void)name;
|
||||
errno = ENOENT;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _times(struct tms *buf)
|
||||
{
|
||||
(void)buf;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _stat(char *file, struct stat *st)
|
||||
{
|
||||
(void)file;
|
||||
st->st_mode = S_IFCHR;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int _link(char *old, char *new)
|
||||
{
|
||||
(void)old;
|
||||
(void)new;
|
||||
errno = EMLINK;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _fork(void)
|
||||
{
|
||||
errno = EAGAIN;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _execve(char *name, char **argv, char **env)
|
||||
{
|
||||
(void)name;
|
||||
(void)argv;
|
||||
(void)env;
|
||||
errno = ENOMEM;
|
||||
return -1;
|
||||
}
|
||||
@@ -0,0 +1,79 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file sysmem.c
|
||||
* @author Generated by STM32CubeIDE
|
||||
* @brief STM32CubeIDE System Memory calls file
|
||||
*
|
||||
* For more information about which C functions
|
||||
* need which of these lowlevel functions
|
||||
* please consult the newlib libc manual
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2024 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes */
|
||||
#include <errno.h>
|
||||
#include <stdint.h>
|
||||
|
||||
/**
|
||||
* Pointer to the current high watermark of the heap usage
|
||||
*/
|
||||
static uint8_t *__sbrk_heap_end = NULL;
|
||||
|
||||
/**
|
||||
* @brief _sbrk() allocates memory to the newlib heap and is used by malloc
|
||||
* and others from the C library
|
||||
*
|
||||
* @verbatim
|
||||
* ############################################################################
|
||||
* # .data # .bss # newlib heap # MSP stack #
|
||||
* # # # # Reserved by _Min_Stack_Size #
|
||||
* ############################################################################
|
||||
* ^-- RAM start ^-- _end _estack, RAM end --^
|
||||
* @endverbatim
|
||||
*
|
||||
* This implementation starts allocating at the '_end' linker symbol
|
||||
* The '_Min_Stack_Size' linker symbol reserves a memory for the MSP stack
|
||||
* The implementation considers '_estack' linker symbol to be RAM end
|
||||
* NOTE: If the MSP stack, at any point during execution, grows larger than the
|
||||
* reserved size, please increase the '_Min_Stack_Size'.
|
||||
*
|
||||
* @param incr Memory size
|
||||
* @return Pointer to allocated memory
|
||||
*/
|
||||
void *_sbrk(ptrdiff_t incr)
|
||||
{
|
||||
extern uint8_t _end; /* Symbol defined in the linker script */
|
||||
extern uint8_t _estack; /* Symbol defined in the linker script */
|
||||
extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */
|
||||
const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size;
|
||||
const uint8_t *max_heap = (uint8_t *)stack_limit;
|
||||
uint8_t *prev_heap_end;
|
||||
|
||||
/* Initialize heap end at first call */
|
||||
if (NULL == __sbrk_heap_end)
|
||||
{
|
||||
__sbrk_heap_end = &_end;
|
||||
}
|
||||
|
||||
/* Protect heap from growing into the reserved MSP stack */
|
||||
if (__sbrk_heap_end + incr > max_heap)
|
||||
{
|
||||
errno = ENOMEM;
|
||||
return (void *)-1;
|
||||
}
|
||||
|
||||
prev_heap_end = __sbrk_heap_end;
|
||||
__sbrk_heap_end += incr;
|
||||
|
||||
return (void *)prev_heap_end;
|
||||
}
|
||||
@@ -0,0 +1,406 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32f1xx.c
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
|
||||
*
|
||||
* 1. This file provides two functions and one global variable to be called from
|
||||
* user application:
|
||||
* - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
|
||||
* factors, AHB/APBx prescalers and Flash settings).
|
||||
* This function is called at startup just after reset and
|
||||
* before branch to main program. This call is made inside
|
||||
* the "startup_stm32f1xx_xx.s" file.
|
||||
*
|
||||
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||||
* by the user application to setup the SysTick
|
||||
* timer or configure other parameters.
|
||||
*
|
||||
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||
* be called whenever the core clock is changed
|
||||
* during program execution.
|
||||
*
|
||||
* 2. After each device reset the HSI (8 MHz) is used as system clock source.
|
||||
* Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to
|
||||
* configure the system clock before to branch to main program.
|
||||
*
|
||||
* 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on
|
||||
* the product used), refer to "HSE_VALUE".
|
||||
* When HSE is used as system clock source, directly or through PLL, and you
|
||||
* are using different crystal you have to adapt the HSE value to your own
|
||||
* configuration.
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f1xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#include "stm32f1xx.h"
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE 8000000U /*!< Default value of the External oscillator in Hz.
|
||||
This value can be provided and adapted by the user application. */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE 8000000U /*!< Default value of the Internal oscillator in Hz.
|
||||
This value can be provided and adapted by the user application. */
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/*!< Uncomment the following line if you need to use external SRAM */
|
||||
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||
/* #define DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
|
||||
|
||||
/* Note: Following vector table addresses must be defined in line with linker
|
||||
configuration. */
|
||||
/*!< Uncomment the following line if you need to relocate the vector table
|
||||
anywhere in Flash or Sram, else the vector table is kept at the automatic
|
||||
remap of boot address selected */
|
||||
/* #define USER_VECT_TAB_ADDRESS */
|
||||
|
||||
#if defined(USER_VECT_TAB_ADDRESS)
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table
|
||||
in Sram else user remap will be done in Flash. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#if defined(VECT_TAB_SRAM)
|
||||
#define VECT_TAB_BASE_ADDRESS SRAM_BASE /*!< Vector Table base address field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#else
|
||||
#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#endif /* VECT_TAB_SRAM */
|
||||
#endif /* USER_VECT_TAB_ADDRESS */
|
||||
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* This variable is updated in three ways:
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
uint32_t SystemCoreClock = 8000000;
|
||||
const uint8_t AHBPrescTable[16U] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
const uint8_t APBPrescTable[8U] = {0, 0, 0, 0, 1, 2, 3, 4};
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
static void SystemInit_ExtMemCtl(void);
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system
|
||||
* Initialize the Embedded Flash Interface, the PLL and update the
|
||||
* SystemCoreClock variable.
|
||||
* @note This function should be used only after reset.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit (void)
|
||||
{
|
||||
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
SystemInit_ExtMemCtl();
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
#endif
|
||||
|
||||
/* Configure the Vector Table location -------------------------------------*/
|
||||
#if defined(USER_VECT_TAB_ADDRESS)
|
||||
SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
|
||||
#endif /* USER_VECT_TAB_ADDRESS */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||||
* be used by the user application to setup the SysTick timer or configure
|
||||
* other parameters.
|
||||
*
|
||||
* @note Each time the core clock (HCLK) changes, this function must be called
|
||||
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||||
* based on this variable will be incorrect.
|
||||
*
|
||||
* @note - The system frequency computed by this function is not the real
|
||||
* frequency in the chip. It is calculated based on the predefined
|
||||
* constant and the selected clock source:
|
||||
*
|
||||
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
|
||||
*
|
||||
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
*
|
||||
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
* or HSI_VALUE(*) multiplied by the PLL factors.
|
||||
*
|
||||
* (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
|
||||
* 8 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
*
|
||||
* (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
|
||||
* 8 MHz or 25 MHz, depending on the product used), user has to ensure
|
||||
* that HSE_VALUE is same as the real frequency of the crystal used.
|
||||
* Otherwise, this function may have wrong result.
|
||||
*
|
||||
* - The result of this function could be not correct when using fractional
|
||||
* value for HSE crystal.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemCoreClockUpdate (void)
|
||||
{
|
||||
uint32_t tmp = 0U, pllmull = 0U, pllsource = 0U;
|
||||
|
||||
#if defined(STM32F105xC) || defined(STM32F107xC)
|
||||
uint32_t prediv1source = 0U, prediv1factor = 0U, prediv2factor = 0U, pll2mull = 0U;
|
||||
#endif /* STM32F105xC */
|
||||
|
||||
#if defined(STM32F100xB) || defined(STM32F100xE)
|
||||
uint32_t prediv1factor = 0U;
|
||||
#endif /* STM32F100xB or STM32F100xE */
|
||||
|
||||
/* Get SYSCLK source -------------------------------------------------------*/
|
||||
tmp = RCC->CFGR & RCC_CFGR_SWS;
|
||||
|
||||
switch (tmp)
|
||||
{
|
||||
case 0x00U: /* HSI used as system clock */
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
case 0x04U: /* HSE used as system clock */
|
||||
SystemCoreClock = HSE_VALUE;
|
||||
break;
|
||||
case 0x08U: /* PLL used as system clock */
|
||||
|
||||
/* Get PLL clock source and multiplication factor ----------------------*/
|
||||
pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
|
||||
pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
|
||||
|
||||
#if !defined(STM32F105xC) && !defined(STM32F107xC)
|
||||
pllmull = ( pllmull >> 18U) + 2U;
|
||||
|
||||
if (pllsource == 0x00U)
|
||||
{
|
||||
/* HSI oscillator clock divided by 2 selected as PLL clock entry */
|
||||
SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
|
||||
}
|
||||
else
|
||||
{
|
||||
#if defined(STM32F100xB) || defined(STM32F100xE)
|
||||
prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
|
||||
/* HSE oscillator clock selected as PREDIV1 clock entry */
|
||||
SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
|
||||
#else
|
||||
/* HSE selected as PLL clock entry */
|
||||
if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
|
||||
{/* HSE oscillator clock divided by 2 */
|
||||
SystemCoreClock = (HSE_VALUE >> 1U) * pllmull;
|
||||
}
|
||||
else
|
||||
{
|
||||
SystemCoreClock = HSE_VALUE * pllmull;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
#else
|
||||
pllmull = pllmull >> 18U;
|
||||
|
||||
if (pllmull != 0x0DU)
|
||||
{
|
||||
pllmull += 2U;
|
||||
}
|
||||
else
|
||||
{ /* PLL multiplication factor = PLL input clock * 6.5 */
|
||||
pllmull = 13U / 2U;
|
||||
}
|
||||
|
||||
if (pllsource == 0x00U)
|
||||
{
|
||||
/* HSI oscillator clock divided by 2 selected as PLL clock entry */
|
||||
SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
|
||||
}
|
||||
else
|
||||
{/* PREDIV1 selected as PLL clock entry */
|
||||
|
||||
/* Get PREDIV1 clock source and division factor */
|
||||
prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
|
||||
prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
|
||||
|
||||
if (prediv1source == 0U)
|
||||
{
|
||||
/* HSE oscillator clock selected as PREDIV1 clock entry */
|
||||
SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
|
||||
}
|
||||
else
|
||||
{/* PLL2 clock selected as PREDIV1 clock entry */
|
||||
|
||||
/* Get PREDIV2 division factor and PLL2 multiplication factor */
|
||||
prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4U) + 1U;
|
||||
pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8U) + 2U;
|
||||
SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;
|
||||
}
|
||||
}
|
||||
#endif /* STM32F105xC */
|
||||
break;
|
||||
|
||||
default:
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
}
|
||||
|
||||
/* Compute HCLK clock frequency ----------------*/
|
||||
/* Get HCLK prescaler */
|
||||
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
|
||||
/* HCLK clock frequency */
|
||||
SystemCoreClock >>= tmp;
|
||||
}
|
||||
|
||||
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||
/**
|
||||
* @brief Setup the external memory controller. Called in startup_stm32f1xx.s
|
||||
* before jump to __main
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in startup_stm32f1xx_xx.s/.c before jump to main.
|
||||
* This function configures the external SRAM mounted on STM3210E-EVAL
|
||||
* board (STM32 High density devices). This SRAM will be used as program
|
||||
* data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
__IO uint32_t tmpreg;
|
||||
/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is
|
||||
required, then adjust the Register Addresses */
|
||||
|
||||
/* Enable FSMC clock */
|
||||
RCC->AHBENR = 0x00000114U;
|
||||
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);
|
||||
|
||||
/* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
|
||||
RCC->APB2ENR = 0x000001E0U;
|
||||
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);
|
||||
|
||||
(void)(tmpreg);
|
||||
|
||||
/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/
|
||||
/*---------------- SRAM Address lines configuration -------------------------*/
|
||||
/*---------------- NOE and NWE configuration --------------------------------*/
|
||||
/*---------------- NE3 configuration ----------------------------------------*/
|
||||
/*---------------- NBL0, NBL1 configuration ---------------------------------*/
|
||||
|
||||
GPIOD->CRL = 0x44BB44BBU;
|
||||
GPIOD->CRH = 0xBBBBBBBBU;
|
||||
|
||||
GPIOE->CRL = 0xB44444BBU;
|
||||
GPIOE->CRH = 0xBBBBBBBBU;
|
||||
|
||||
GPIOF->CRL = 0x44BBBBBBU;
|
||||
GPIOF->CRH = 0xBBBB4444U;
|
||||
|
||||
GPIOG->CRL = 0x44BBBBBBU;
|
||||
GPIOG->CRH = 0x444B4B44U;
|
||||
|
||||
/*---------------- FSMC Configuration ---------------------------------------*/
|
||||
/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/
|
||||
|
||||
FSMC_Bank1->BTCR[4U] = 0x00001091U;
|
||||
FSMC_Bank1->BTCR[5U] = 0x00110212U;
|
||||
}
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
@@ -0,0 +1,104 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file tim.c
|
||||
* @brief This file provides code for the configuration
|
||||
* of the TIM instances.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "tim.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
TIM_HandleTypeDef htim6;
|
||||
|
||||
/* TIM6 init function */
|
||||
void MX_TIM6_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN TIM6_Init 0 */
|
||||
|
||||
/* USER CODE END TIM6_Init 0 */
|
||||
|
||||
TIM_MasterConfigTypeDef sMasterConfig = {0};
|
||||
|
||||
/* USER CODE BEGIN TIM6_Init 1 */
|
||||
|
||||
/* USER CODE END TIM6_Init 1 */
|
||||
htim6.Instance = TIM6;
|
||||
htim6.Init.Prescaler = 71;
|
||||
htim6.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
htim6.Init.Period = 999;
|
||||
htim6.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||
if (HAL_TIM_Base_Init(&htim6) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
||||
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
||||
if (HAL_TIMEx_MasterConfigSynchronization(&htim6, &sMasterConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN TIM6_Init 2 */
|
||||
|
||||
/* USER CODE END TIM6_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
|
||||
{
|
||||
|
||||
if(tim_baseHandle->Instance==TIM6)
|
||||
{
|
||||
/* USER CODE BEGIN TIM6_MspInit 0 */
|
||||
|
||||
/* USER CODE END TIM6_MspInit 0 */
|
||||
/* TIM6 clock enable */
|
||||
__HAL_RCC_TIM6_CLK_ENABLE();
|
||||
|
||||
/* TIM6 interrupt Init */
|
||||
HAL_NVIC_SetPriority(TIM6_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(TIM6_IRQn);
|
||||
/* USER CODE BEGIN TIM6_MspInit 1 */
|
||||
|
||||
/* USER CODE END TIM6_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle)
|
||||
{
|
||||
|
||||
if(tim_baseHandle->Instance==TIM6)
|
||||
{
|
||||
/* USER CODE BEGIN TIM6_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END TIM6_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_TIM6_CLK_DISABLE();
|
||||
|
||||
/* TIM6 interrupt Deinit */
|
||||
HAL_NVIC_DisableIRQ(TIM6_IRQn);
|
||||
/* USER CODE BEGIN TIM6_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END TIM6_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
@@ -0,0 +1,161 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usart.c
|
||||
* @brief This file provides code for the configuration
|
||||
* of the USART instances.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usart.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
UART_HandleTypeDef huart1;
|
||||
DMA_HandleTypeDef hdma_usart1_rx;
|
||||
DMA_HandleTypeDef hdma_usart1_tx;
|
||||
|
||||
/* USART1 init function */
|
||||
|
||||
void MX_USART1_UART_Init(uint32_t BaudRate)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN USART1_Init 0 */
|
||||
|
||||
/* USER CODE END USART1_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN USART1_Init 1 */
|
||||
|
||||
/* USER CODE END USART1_Init 1 */
|
||||
huart1.Instance = USART1;
|
||||
huart1.Init.BaudRate = 115200;
|
||||
huart1.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart1.Init.StopBits = UART_STOPBITS_1;
|
||||
huart1.Init.Parity = UART_PARITY_NONE;
|
||||
huart1.Init.Mode = UART_MODE_TX_RX;
|
||||
huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
huart1.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
if (HAL_UART_Init(&huart1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN USART1_Init 2 */
|
||||
|
||||
/* USER CODE END USART1_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(uartHandle->Instance==USART1)
|
||||
{
|
||||
/* USER CODE BEGIN USART1_MspInit 0 */
|
||||
|
||||
/* USER CODE END USART1_MspInit 0 */
|
||||
/* USART1 clock enable */
|
||||
__HAL_RCC_USART1_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
/**USART1 GPIO Configuration
|
||||
PA9 ------> USART1_TX
|
||||
PA10 ------> USART1_RX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_9;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_10;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* USART1 DMA Init */
|
||||
/* USART1_RX Init */
|
||||
hdma_usart1_rx.Instance = DMA1_Channel5;
|
||||
hdma_usart1_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
||||
hdma_usart1_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_usart1_rx.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_usart1_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||
hdma_usart1_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||
hdma_usart1_rx.Init.Mode = DMA_NORMAL;
|
||||
hdma_usart1_rx.Init.Priority = DMA_PRIORITY_LOW;
|
||||
if (HAL_DMA_Init(&hdma_usart1_rx) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(uartHandle,hdmarx,hdma_usart1_rx);
|
||||
|
||||
/* USART1_TX Init */
|
||||
hdma_usart1_tx.Instance = DMA1_Channel4;
|
||||
hdma_usart1_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
||||
hdma_usart1_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_usart1_tx.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_usart1_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||
hdma_usart1_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||
hdma_usart1_tx.Init.Mode = DMA_NORMAL;
|
||||
hdma_usart1_tx.Init.Priority = DMA_PRIORITY_LOW;
|
||||
if (HAL_DMA_Init(&hdma_usart1_tx) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(uartHandle,hdmatx,hdma_usart1_tx);
|
||||
|
||||
/* USART1 interrupt Init */
|
||||
HAL_NVIC_SetPriority(USART1_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(USART1_IRQn);
|
||||
/* USER CODE BEGIN USART1_MspInit 1 */
|
||||
|
||||
/* USER CODE END USART1_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
|
||||
{
|
||||
|
||||
if(uartHandle->Instance==USART1)
|
||||
{
|
||||
/* USER CODE BEGIN USART1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END USART1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_USART1_CLK_DISABLE();
|
||||
|
||||
/**USART1 GPIO Configuration
|
||||
PA9 ------> USART1_TX
|
||||
PA10 ------> USART1_RX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
|
||||
|
||||
/* USART1 DMA DeInit */
|
||||
HAL_DMA_DeInit(uartHandle->hdmarx);
|
||||
HAL_DMA_DeInit(uartHandle->hdmatx);
|
||||
|
||||
/* USART1 interrupt Deinit */
|
||||
HAL_NVIC_DisableIRQ(USART1_IRQn);
|
||||
/* USER CODE BEGIN USART1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END USART1_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
@@ -0,0 +1,470 @@
|
||||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f103xe.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F103xE Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Configure external SRAM mounted on STM3210E-EVAL board
|
||||
* to be used as data memory (optional, to be enabled by user)
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF1E0F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_2_IRQHandler
|
||||
.word USB_HP_CAN1_TX_IRQHandler
|
||||
.word USB_LP_CAN1_RX0_IRQHandler
|
||||
.word CAN1_RX1_IRQHandler
|
||||
.word CAN1_SCE_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_IRQHandler
|
||||
.word TIM1_UP_IRQHandler
|
||||
.word TIM1_TRG_COM_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USBWakeUp_IRQHandler
|
||||
.word TIM8_BRK_IRQHandler
|
||||
.word TIM8_UP_IRQHandler
|
||||
.word TIM8_TRG_COM_IRQHandler
|
||||
.word TIM8_CC_IRQHandler
|
||||
.word ADC3_IRQHandler
|
||||
.word FSMC_IRQHandler
|
||||
.word SDIO_IRQHandler
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
|
||||
STM32F10x High Density devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_2_IRQHandler
|
||||
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_CAN1_TX_IRQHandler
|
||||
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_CAN1_RX0_IRQHandler
|
||||
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_IRQHandler
|
||||
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_IRQHandler
|
||||
.thumb_set TIM1_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_IRQHandler
|
||||
.thumb_set USBWakeUp_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_BRK_IRQHandler
|
||||
.thumb_set TIM8_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_UP_IRQHandler
|
||||
.thumb_set TIM8_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_TRG_COM_IRQHandler
|
||||
.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_CC_IRQHandler
|
||||
.thumb_set TIM8_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC3_IRQHandler
|
||||
.thumb_set ADC3_IRQHandler,Default_Handler
|
||||
|
||||
.weak FSMC_IRQHandler
|
||||
.thumb_set FSMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDIO_IRQHandler
|
||||
.thumb_set SDIO_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_5_IRQHandler
|
||||
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
|
||||
|
||||
Reference in new issue
Block a user