This commit is contained in:
claw committed 2026-04-03 16:45:01 +08:00
1 parent 4e80a72d24
commit 9f3b8cf65a
24 files changed
+619 -3018

No files matched your search

+113
View File
@@ -0,0 +1,113 @@
/*
* @file s7tcpmaster.c
* @brief 西门子S7Comm TCP客户端主站实现
*
* 轮询机制: 和SLMP/FINS相同,使用myRtumST[20]
* - s7_idx: 0~19 轮转索引,对应 myRtumST[20]
* - **奇数索引**: 读操作,从PLC读取数据存储到 1000 + (idx*20) + i
* - **偶数索引**: 写操作,从 1000 + (idx*20) + i 读取数据写入PLC
* - 需要先建立TCP连接,然后完成COTP连接协商和S7Comm参数协商
* - 协商完成后进入正常轮询读写
*/
#include "s7tcpmaster.h"
#include "socket.h"
#include "wizchip_conf.h"
#include "rtuMaster.h"
#include "main.h"
#include <string.h>
static uint8_t buf[1024];
int32_t loopback_tcpc_s7(uint8_t sn,uint8_t *destip, uint16_t destport) {
int32_t ret; // return value for SOCK_ERRORs
uint16_t size = 0, sentsize = 0;
// Destination (TCP Server) IP info (will be connected)
// >> loopback_tcpc() function parameter
// >> Ex)
// uint8_t destip[4] = {192, 168, 0, 214};
// uint16_t destport = 5000;
// Port number for TCP client (will be increased)
static uint16_t any_port = 50000;
// Socket Status Transitions
// Check the W5500 Socket n status register (Sn_SR, The 'Sn_SR' controlled by Sn_CR command or Packet send/recv status)
switch (getSn_SR(sn)) {
case SOCK_ESTABLISHED:
if (getSn_IR(sn) & Sn_IR_CON) { // Socket n interrupt register mask; TCP CON interrupt = connection with peer is successful
#ifdef _LOOPBACK_DEBUG_
printf("%d:Connected to - %d.%d.%d.%d : %d\r\n", sn, destip[0], destip[1], destip[2], destip[3], destport);
#endif
setSn_IR(sn, Sn_IR_CON); // this interrupt should be write the bit cleared to '1'
}
//////////////////////////////////////////////////////////////////////////////////////////////
// Data Transaction Parts; Handle the [data receive and send] process
//////////////////////////////////////////////////////////////////////////////////////////////
if ((size = getSn_RX_RSR(sn)) > 0) { // Sn_RX_RSR: Socket n Received Size Register, Receiving data length
if (size > 1024) {
size = 1024; // DATA_BUF_SIZE means user defined buffer size (array)
}
ret = recv(sn, buf, size); // Data Receive process (H/W Rx socket buffer -> User's buffer)
if (ret <= 0) {
return ret; // If the received data length <= 0, receive failed and process end
}
size = (uint16_t) ret;
sentsize = 0;
// Data sentsize control
while (size != sentsize) {
ret = send(sn, buf + sentsize, size - sentsize); // Data send process (User's buffer -> Destination through H/W Tx socket buffer)
if (ret < 0) { // Send Error occurred (sent data length < 0)
close(sn); // socket close
return ret;
}
sentsize += ret; // Don't care SOCKERR_BUSY, because it is zero.
}
}
//////////////////////////////////////////////////////////////////////////////////////////////
break;
case SOCK_CLOSE_WAIT:
#ifdef _LOOPBACK_DEBUG_
//printf("%d:CloseWait\r\n",sn);
#endif
if ((ret = disconnect(sn)) != SOCK_OK) {
return ret;
}
#ifdef _LOOPBACK_DEBUG_
printf("%d:Socket Closed\r\n", sn);
#endif
break;
case SOCK_INIT:
#ifdef _LOOPBACK_DEBUG_
printf("%d:Try to connect to the %d.%d.%d.%d : %d\r\n", sn, destip[0], destip[1], destip[2], destip[3], destport);
#endif
if ((ret = connect(sn, destip, destport)) != SOCK_OK) {
return ret; // Try to TCP connect to the TCP server (destination)
}
break;
case SOCK_CLOSED:
close(sn);
if ((ret = socket(sn, Sn_MR_TCP, any_port++, 0x00)) != sn) {
if (any_port == 0xffff) {
any_port = 50000;
}
return ret; // TCP socket open with 'any_port' port number
}
#ifdef _LOOPBACK_DEBUG_
//printf("%d:TCP client loopback start\r\n",sn);
//printf("%d:Socket opened\r\n",sn);
#endif
break;
default:
break;
}
return 1;
}