西门子s7通信也是一种tcp通信,比slmp通信多两次协商。参考slmp通信代码,使用myrtumst作为数据配置。用slmp和fins通信类似的代码格式,完成s7 tcpc的代码。 通信之前需要COTP协商 uint8_t comm1[] = { 0x03, 0x00, 0x00, 0x16, 0x11, 0xE0, 0x00, 0x00, 0x00, 0x01, 0x00, 0xC0, 0x01, 0x0A, 0xC1, 0x02, 0x01, 0x00, 0xC2, 0x02, 0x03, 0x02 }; 和S7Comm协商 uint8_t comm2[] = { 0x03, 0x00, 0x00, 0x19, 0x02, 0xF0, 0x80, 0x32, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x01, 0x00, 0x01, 0x01, 0xE0 }; 如果你也不知道西门子 s7 通信 协商报文的回应,那先不管报文回应吧,后续再完善,我目前不知道,有回应就算通过。 两次协商之后。就可以开始通信了 void to_big_endian_16(uint16_t value, uint8_t *dest) { dest[0] = (uint8_t) (value >> 8); // 高字节 dest[1] = (uint8_t) (value & 0xFF); // 低字节 } void to_big_endian_24(uint32_t value, uint8_t *dest) { dest[0] = (uint8_t) (value >> 16); // 最高字节 dest[1] = (uint8_t) (value >> 8); // 次高字节 dest[2] = (uint8_t) (value & 0xFF); // 最低字节 } typedef union { uint8_t frame[31]; struct { uint8_t padding1[23]; uint8_t read_size[2]; uint8_t db_id[2]; uint8_t padding2[1]; uint8_t start_address[3]; }; } s7ReadFrame; typedef union { uint8_t frame[1024]; struct { uint8_t padding1[2]; uint8_t frame_size[2]; uint8_t padding2[11]; uint8_t dataframe_size[2]; uint8_t padding3[6]; uint8_t data_size[2]; uint8_t db_id[2]; uint8_t padding4[1]; uint8_t start_address[3]; uint8_t padding5[2]; uint8_t databyte_size_t8[2]; uint8_t data[800]; }; } s7WriteFrame; s7ReadFrame readframe = { .frame = { 0x03, 0x00, 0x00, 0x1f, 0x02, 0xf0, 0x80, 0x32, 0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0x0e, 0x00, 0x00, 0x04, 0x01, 0x12, 0x0A, 0x10, 0x02, 0x00, 0x02, 0x00, 0x01, 0x84, 0x00, 0x00, 0x00 } }; s7WriteFrame writeframe = { .frame = { 0x03, 0x00, 0x00, 0x29, 0x02, 0xf0, 0x80, 0x32, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x0e, 0x00, 0x0a, 0x05, 0x01, 0x12, 0x0a, 0x10, 0x02, 0x00, 0x06, 0x00, 0x01, 0x84, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 } }; 读取报文准备 to_big_endian_16(get_register(DBID1_IDX), readframe.db_id); to_big_endian_24(get_register(START1_IDX) * 8, readframe.start_address); to_big_endian_16(get_register(SIZE1_IDX) * 2, readframe.read_size); memcpy(sendbuf, readframe.frame, read_size); sendbufsize = read_size; 写入准备报文 uint16_t prepare_write_frame(uint8_t *write, uint16_t writebyte_size) { if (writebyte_size == 0) { return 0; } uint16_t frame_size = 35 + writebyte_size; to_big_endian_16(frame_size, writeframe.frame_size); to_big_endian_16(4 + writebyte_size, writeframe.dataframe_size); to_big_endian_16(writebyte_size, writeframe.data_size); to_big_endian_16(get_register(DBID2_IDX), writeframe.db_id); to_big_endian_24(get_register(START2_IDX) * 8, writeframe.start_address); to_big_endian_16(writebyte_size * 8, writeframe.databyte_size_t8); memcpy(writeframe.data, write, writebyte_size); return frame_size; } 写入的回应不用管,读取的回应要解析到本地。 看完需求不着急写,有疑问先和我确定,写的话写入到s7tcpmaster.c。 假设你是专业的编程专家,确保代码正确。