/* USER CODE BEGIN Header */ /** ****************************************************************************** * @file : main.c * @brief : Main program body ****************************************************************************** * @attention * * Copyright (c) 2026 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* USER CODE END Header */ /* Includes ------------------------------------------------------------------*/ #include "main.h" #include "dma.h" #include "iwdg.h" #include "spi.h" #include "tim.h" #include "usart.h" #include "gpio.h" /* Private includes ----------------------------------------------------------*/ /* USER CODE BEGIN Includes */ #include "w5500/w5500.h" #include "w5500/w5500_port.h" #include "w5500/loopback.h" #include "w5500/webpages.h" #include "w5500/httpUtil.h" #include "w5500/slmpMaster.h" #include "w5500/modbus_crc.h" #include "w5500/modbusSlave.h" #include "w5500/rtuMaster.h" /* USER CODE END Includes */ /* Private typedef -----------------------------------------------------------*/ /* USER CODE BEGIN PTD */ /* USER CODE END PTD */ /* Private define ------------------------------------------------------------*/ /* USER CODE BEGIN PD */ /* USER CODE END PD */ /* Private macro -------------------------------------------------------------*/ /* USER CODE BEGIN PM */ /* USER CODE END PM */ /* Private variables ---------------------------------------------------------*/ /* USER CODE BEGIN PV */ uint8_t local_ip[4], slmp_ip[4]; uint16_t slmp_port; uint16_t out_word1 = 0; uint16_t speed = 0; uint16_t speed_idx = 0; /* USER CODE END PV */ /* Private function prototypes -----------------------------------------------*/ void SystemClock_Config(void); /* USER CODE BEGIN PFP */ /* USER CODE END PFP */ /* Private user code ---------------------------------------------------------*/ /* USER CODE BEGIN 0 */ //////////////////////////////////////////////////////////// ↓定时器(TIME6=1MS)↓ ///////////////////////////////////////////// uint16_t beatcnt = 0; _Bool beatval; uint16_t runbeat, rstbtn_timeout; void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) { if (htim == &htim6) { update_timeout_slmp(); update_timeout_fins(); if (runbeat < 1000) { //控制运行指示灯间隔1秒闪烁 runbeat++; } else { runbeat = 0; HAL_GPIO_TogglePin(run_GPIO_Port, run_Pin); set_register(109, HAL_GPIO_ReadPin(run_GPIO_Port, run_Pin) ? 1 : 0); //109运行心跳位,间隔1秒闪烁 } if (HAL_GPIO_ReadPin(rstbtn_GPIO_Port, rstbtn_Pin) == GPIO_PIN_RESET) { //系统参数初始化等待延时,如果按下3秒系统设定数据复位 if (rstbtn_timeout < 0xffff) { rstbtn_timeout++; } else { rstbtn_timeout = 0; } } } } //////////////////////////////////////////////////////////// ↑定时器↑ ///////////////////////////////////////////// ///////////////////////////////////// uint16_t flash_reset[100]; void reset_button() { if (rstbtn_timeout > 3000) { memset(flash_reset, 0xFF, 200); Write_To_Flash_uint16(EDIT_FLASH_ADDRESS, flash_reset, 100); rstbtn_timeout = 0; set_register(120, get_register(120) + 1); } } ////////////////////////////////////////////////////////////↓将110地址输出给继电器↓///////////////////////////////////////////// int getBit(int num, int n) { return (num & (1 << n)) >> n; } void map_out(uint16_t startAddress) { out_word1 = get_register(startAddress); (getBit(out_word1, 0)) ? HAL_GPIO_WritePin(o1_GPIO_Port, o1_Pin, GPIO_PIN_SET) : HAL_GPIO_WritePin(o1_GPIO_Port, o1_Pin, GPIO_PIN_RESET); (getBit(out_word1, 1)) ? HAL_GPIO_WritePin(o2_GPIO_Port, o2_Pin, GPIO_PIN_SET) : HAL_GPIO_WritePin(o2_GPIO_Port, o2_Pin, GPIO_PIN_RESET); (getBit(out_word1, 2)) ? HAL_GPIO_WritePin(o3_GPIO_Port, o3_Pin, GPIO_PIN_SET) : HAL_GPIO_WritePin(o3_GPIO_Port, o3_Pin, GPIO_PIN_RESET); (getBit(out_word1, 3)) ? HAL_GPIO_WritePin(o4_GPIO_Port, o4_Pin, GPIO_PIN_SET) : HAL_GPIO_WritePin(o4_GPIO_Port, o4_Pin, GPIO_PIN_RESET); (getBit(out_word1, 4)) ? HAL_GPIO_WritePin(o5_GPIO_Port, o5_Pin, GPIO_PIN_SET) : HAL_GPIO_WritePin(o5_GPIO_Port, o5_Pin, GPIO_PIN_RESET); (getBit(out_word1, 5)) ? HAL_GPIO_WritePin(o6_GPIO_Port, o6_Pin, GPIO_PIN_SET) : HAL_GPIO_WritePin(o6_GPIO_Port, o6_Pin, GPIO_PIN_RESET); (getBit(out_word1, 6)) ? HAL_GPIO_WritePin(o7_GPIO_Port, o7_Pin, GPIO_PIN_SET) : HAL_GPIO_WritePin(o7_GPIO_Port, o7_Pin, GPIO_PIN_RESET); (getBit(out_word1, 7)) ? HAL_GPIO_WritePin(o8_GPIO_Port, o8_Pin, GPIO_PIN_SET) : HAL_GPIO_WritePin(o8_GPIO_Port, o8_Pin, GPIO_PIN_RESET); (getBit(out_word1, 8)) ? HAL_GPIO_WritePin(o9_GPIO_Port, o9_Pin, GPIO_PIN_SET) : HAL_GPIO_WritePin(o9_GPIO_Port, o9_Pin, GPIO_PIN_RESET); (getBit(out_word1, 9)) ? HAL_GPIO_WritePin(o10_GPIO_Port, o10_Pin, GPIO_PIN_SET) : HAL_GPIO_WritePin(o10_GPIO_Port, o10_Pin, GPIO_PIN_RESET); (getBit(out_word1, 10)) ? HAL_GPIO_WritePin(o11_GPIO_Port, o11_Pin, GPIO_PIN_SET) : HAL_GPIO_WritePin(o11_GPIO_Port, o11_Pin, GPIO_PIN_RESET); (getBit(out_word1, 11)) ? HAL_GPIO_WritePin(o12_GPIO_Port, o12_Pin, GPIO_PIN_SET) : HAL_GPIO_WritePin(o12_GPIO_Port, o12_Pin, GPIO_PIN_RESET); (getBit(out_word1, 12)) ? HAL_GPIO_WritePin(o13_GPIO_Port, o13_Pin, GPIO_PIN_SET) : HAL_GPIO_WritePin(o13_GPIO_Port, o13_Pin, GPIO_PIN_RESET); (getBit(out_word1, 13)) ? HAL_GPIO_WritePin(o14_GPIO_Port, o14_Pin, GPIO_PIN_SET) : HAL_GPIO_WritePin(o14_GPIO_Port, o14_Pin, GPIO_PIN_RESET); (getBit(out_word1, 14)) ? HAL_GPIO_WritePin(o15_GPIO_Port, o15_Pin, GPIO_PIN_SET) : HAL_GPIO_WritePin(o15_GPIO_Port, o15_Pin, GPIO_PIN_RESET); (getBit(out_word1, 15)) ? HAL_GPIO_WritePin(o16_GPIO_Port, o16_Pin, GPIO_PIN_SET) : HAL_GPIO_WritePin(o16_GPIO_Port, o16_Pin, GPIO_PIN_RESET); } ////////////////////////////////////////////////////////////↑将110地址输出给继电器上///////////////////////////////////////////// void Read_From_Flash(uint32_t startAddress, uint16_t *buffer, uint32_t numElements) { for (uint32_t i = 0; i < numElements; i++) { buffer[i] = *(__IO uint16_t*) (startAddress + (i * 2)); } } void load_data() { // 初始化保存数据 uint16_t readDataBuffer[FLASH_SAVE_SIZE]; Read_From_Flash(EDIT_FLASH_ADDRESS, readDataBuffer, FLASH_SAVE_SIZE); set_register_range(MODBUS_SAVE_START, FLASH_SAVE_SIZE, readDataBuffer); //加载参数 slmp_port = get_register(85); slmp_ip[0] = get_register(81); slmp_ip[1] = get_register(82); slmp_ip[2] = get_register(83); slmp_ip[3] = get_register(84); if (slmp_ip[0] == 0xff || slmp_ip[1] == 0xff || slmp_ip[2] == 0xff || slmp_ip[3] == 0xff) { slmp_ip[0] = 192; slmp_ip[1] = 168; slmp_ip[2] = 1; slmp_ip[3] = 9; set_register(81, 192); set_register(82, 168); set_register(83, 1); set_register(84, 9); } if (slmp_port == 0xffff) { set_register(85, 1025); } local_ip[0] = get_register(86); local_ip[1] = get_register(87); local_ip[2] = get_register(88); local_ip[3] = get_register(89); if (local_ip[0] == 0xff || local_ip[1] == 0xff || local_ip[2] == 0xff || local_ip[3] == 0xff) { local_ip[0] = 192; local_ip[1] = 168; local_ip[2] = 1; local_ip[3] = 13; set_register(86, 192); set_register(87, 168); set_register(88, 1); set_register(89, 13); } if (get_register(90) < 1 || get_register(90) > 0xff) { set_register(90, 120); } for (uint16_t i = 0; i < 80; i++) { if (get_register(i) == 0xffff) { set_register(i, 0); } } set_slaveid(get_register(90)); if (get_register(80) == 0xffff) { set_register(80, 0); } uint32_t BaudRate = 0; switch (get_register(80)) { case 0: BaudRate = 9600; break; case 1: BaudRate = 14400; break; case 2: BaudRate = 19200; break; case 3: BaudRate = 38400; break; case 4: BaudRate = 56000; break; case 5: BaudRate = 57600; break; case 6: BaudRate = 115200; break; default: BaudRate = 9600; break; } MX_USART1_UART_Init(BaudRate); if (get_register(91) == 0xffff) { set_register(91, 0); } master.localSlaveId = get_register(90); master.isMaster = get_register(91) ? 1 : 0; master.plc_type = get_register(92); } void commled() { if (comm_count > 100) { HAL_GPIO_TogglePin(comm_GPIO_Port, comm_Pin); comm_count = 0; } if (getSn_SR(0) == SOCK_CLOSED && getSn_SR(1) == SOCK_CLOSED) { HAL_GPIO_WritePin(comm_GPIO_Port, comm_Pin, GPIO_PIN_SET); } } /* USER CODE END 0 */ /** * @brief The application entry point. * @retval int */ int main(void) { /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ /* MCU Configuration--------------------------------------------------------*/ /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ HAL_Init(); /* USER CODE BEGIN Init */ /* USER CODE END Init */ /* Configure the system clock */ SystemClock_Config(); /* USER CODE BEGIN SysInit */ /* USER CODE END SysInit */ /* Initialize all configured peripherals */ MX_GPIO_Init(); MX_DMA_Init(); MX_IWDG_Init(); // MX_USART1_UART_Init(); MX_SPI1_Init(); MX_TIM6_Init(); /* USER CODE BEGIN 2 */ HAL_TIM_Base_Start_IT(&htim6); load_data(); w5500_init(local_ip); httpServer_init(); reg_httpServer_cbfunc(NVIC_SystemReset, NULL); reg_httpServer_webContent((uint8_t*) "index.html", (uint8_t*) rtu_master); reg_httpServer_webContent((uint8_t*) "ajax.js", (uint8_t*) w5x00web_ajax_js); initRtuMaster(); /* USER CODE END 2 */ /* Infinite loop */ /* USER CODE BEGIN WHILE */ while (1) { /* USER CODE END WHILE */ /* USER CODE BEGIN 3 */ HAL_IWDG_Refresh(&hiwdg); map_out(110); reset_button(); commled(); httpServer_run_main(); // 网口通信 loopback_comm(slmp_ip, slmp_port, local_ip[3]); // 串口通信 RTU_Master_Loop(); } /* USER CODE END 3 */ } /** * @brief System Clock Configuration * @retval None */ void SystemClock_Config(void) { RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; /** Initializes the RCC Oscillators according to the specified parameters * in the RCC_OscInitTypeDef structure. */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSI; RCC_OscInitStruct.HSIState = RCC_HSI_ON; RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; RCC_OscInitStruct.LSIState = RCC_LSI_ON; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI_DIV2; RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { Error_Handler(); } /** Initializes the CPU, AHB and APB buses clocks */ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) { Error_Handler(); } } /* USER CODE BEGIN 4 */ /* USER CODE END 4 */ /** * @brief This function is executed in case of error occurrence. * @retval None */ void Error_Handler(void) { /* USER CODE BEGIN Error_Handler_Debug */ /* User can add his own implementation to report the HAL error return state */ __disable_irq(); while (1) { } /* USER CODE END Error_Handler_Debug */ } #ifdef USE_FULL_ASSERT /** * @brief Reports the name of the source file and the source line number * where the assert_param error has occurred. * @param file: pointer to the source file name * @param line: assert_param error line source number * @retval None */ void assert_failed(uint8_t *file, uint32_t line) { /* USER CODE BEGIN 6 */ /* User can add his own implementation to report the file name and line number, ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ /* USER CODE END 6 */ } #endif /* USE_FULL_ASSERT */