/* USER CODE BEGIN Header */ /** ****************************************************************************** * @file : main.c * @brief : Main program body ****************************************************************************** * @attention * * Copyright (c) 2024 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* USER CODE END Header */ /* Includes ------------------------------------------------------------------*/ #include "main.h" #include "dma.h" #include "spi.h" #include "tim.h" #include "usart.h" #include "gpio.h" /* Private includes ----------------------------------------------------------*/ /* USER CODE BEGIN Includes */ #include "stdio.h" #include "w5500/w5500_port.h" #include "w5500/modbusSlave.h" #include "w5500/modbus_crc.h" #include "w5500/loopback.h" #include "w5500/httpParser.h" #include "w5500/httpServer.h" #include "w5500/webpages.h" #include "w5500/httpUtil.h" #include "w5500/slmpMaster.h" #include "w5500/modbusRtuMaster.h" #include "w5500/loopback2.h" #include "w5500/rtuMaster.h" /* USER CODE END Includes */ /* Private typedef -----------------------------------------------------------*/ /* USER CODE BEGIN PTD */ /* USER CODE END PTD */ /* Private define ------------------------------------------------------------*/ /* USER CODE BEGIN PD */ #define FLASH_LAST_PAGE_512 0x0807F800 #define IP_ADDR 20 #define run_lamp_on HAL_GPIO_WritePin(run_lamp_GPIO_Port, run_lamp_Pin, GPIO_PIN_RESET) #define run_lamp_off HAL_GPIO_WritePin(run_lamp_GPIO_Port, run_lamp_Pin, GPIO_PIN_SET) #define comm_lamp_on HAL_GPIO_WritePin(comm_lamp_GPIO_Port, comm_lamp_Pin, GPIO_PIN_RESET) #define comm_lamp_off HAL_GPIO_WritePin(comm_lamp_GPIO_Port, comm_lamp_Pin, GPIO_PIN_SET) #define RE_SET HAL_GPIO_WritePin(re485_GPIO_Port, re485_Pin, GPIO_PIN_SET) #define RE_RESET HAL_GPIO_WritePin(re485_GPIO_Port, re485_Pin, GPIO_PIN_RESET) /* USER CODE END PD */ /* Private macro -------------------------------------------------------------*/ /* USER CODE BEGIN PM */ /* USER CODE END PM */ /* Private variables ---------------------------------------------------------*/ /* USER CODE BEGIN PV */ uint8_t commType = 0; // 0 slmp, 1 omr _Bool comm1, comm2; uint16_t comm_cnt, prev_cnt; uint16_t slmpTimeout = 0; uint16_t slmpTimegap = 1; uint16_t slmp_send_loop = 0; uint8_t w5500_rx[1024]; uint8_t uart_rx[255]; uint8_t uart_tx[255]; uint8_t local_ip[4]; uint8_t slmp_ip[4]; uint16_t slmp_port; uint16_t in1_word = 0; uint16_t in2_word = 0; uint16_t in3_word = 0; uint16_t in4_word = 0; uint16_t out_word1 = 0; uint16_t out_word2 = 0; ////////////////////////////////////////////////////////// 新增变量 ////////////////////////// rtumST readST[10] = { { .slave_id = 0, .slave_address = 1, .plc_address = 2, .size = 3 }, { .slave_id = 4, .slave_address = 5, .plc_address = 6, .size = 7 }, { .slave_id = 8, .slave_address = 9, .plc_address = 10, .size = 11 }, { .slave_id = 12, .slave_address = 13, .plc_address = 14, .size = 15 }, { .slave_id = 16, .slave_address = 17, .plc_address = 18, .size = 19 }, { .slave_id = 20, .slave_address = 21, .plc_address = 22, .size = 23 }, { .slave_id = 24, .slave_address = 25, .plc_address = 26, .size = 27 }, { .slave_id = 28, .slave_address = 29, .plc_address = 30, .size = 31 }, { .slave_id = 32, .slave_address = 33, .plc_address = 34, .size = 35 }, { .slave_id = 36, .slave_address = 37, .plc_address = 38, .size = 39 } }; rtumST writeST[10] = { { .slave_id = 40, .slave_address = 41, .plc_address = 42, .size = 43 }, { .slave_id = 44, .slave_address = 45, .plc_address = 46, .size = 47 }, { .slave_id = 48, .slave_address = 49, .plc_address = 50, .size = 51 }, { .slave_id = 52, .slave_address = 53, .plc_address = 54, .size = 55 }, { .slave_id = 56, .slave_address = 57, .plc_address = 58, .size = 59 }, { .slave_id = 60, .slave_address = 61, .plc_address = 62, .size = 63 }, { .slave_id = 64, .slave_address = 65, .plc_address = 66, .size = 67 }, { .slave_id = 68, .slave_address = 69, .plc_address = 70, .size = 71 }, { .slave_id = 72, .slave_address = 73, .plc_address = 74, .size = 75 }, { .slave_id = 76, .slave_address = 77, .plc_address = 78, .size = 79 } }; rtumST myRtumST[20]; RtuMaster master = { .localStartIdx = 1400 }; ////////////////////////////////////////////////////////// 新增变量 ////////////////////////// /* USER CODE END PV */ /* Private function prototypes -----------------------------------------------*/ void SystemClock_Config(void); /* USER CODE BEGIN PFP */ #ifdef __GNUC__ #define PUTCHAR_PROTOTYPE int __io_putchar(int ch) #else #define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f) #endif PUTCHAR_PROTOTYPE { HAL_UART_Transmit(&huart1, (uint8_t*) &ch, 1, 0xFFFF); return ch; } /* USER CODE END PFP */ /* Private user code ---------------------------------------------------------*/ /* USER CODE BEGIN 0 */ /** * uint16_t data_array[] = {0x1234, 0x5678, 0x9ABC}; * write_flash_u16(data_array, 3); */ void write_flash_u16(uint16_t *data, uint32_t length, uint32_t user_save_flash) { HAL_FLASH_Unlock(); FLASH_EraseInitTypeDef EraseInitStruct; uint32_t SectorError; // 擦除扇区 EraseInitStruct.TypeErase = TYPEERASE_PAGES; EraseInitStruct.PageAddress = user_save_flash; EraseInitStruct.NbPages = 1; if (HAL_FLASHEx_Erase(&EraseInitStruct, &SectorError) != HAL_OK) { // 擦除错误处理 HAL_FLASH_Lock(); Error_Handler(); } // 写入数据 for (uint32_t i = 0; i < length; i += 2) { uint32_t word = 0; if (i + 1 < length) { // 将两�??????? u16 组合成一�??????? u32 word = ((uint32_t) data[i + 1] << 16) | data[i]; } else { // 如果数据长度是奇数,�???????后一�??????? u16 �???????要单独处�??????? word = data[i]; } // 写入组合好的 32 位数�??????? if (HAL_FLASH_Program(TYPEPROGRAM_WORD, user_save_flash, word) != HAL_OK) { HAL_FLASH_Lock(); Error_Handler(); } user_save_flash += 4; // 4 字节为一个单位,移动到下�???????个地�??????? } HAL_FLASH_Lock(); // 写完后锁�??????? Flash } /** * uint16_t data_array[3]; * read_flash_u16(data_array, 3); */ void read_flash_u16(uint16_t *data, uint32_t length, uint32_t user_save_flash) { for (uint32_t i = 0; i < length; i += 2) { uint32_t word = *(uint32_t*) user_save_flash; // �??????? Flash 中读�??????? 32 位数�??????? // 拆分 32 位数据为两个 16 位数�??????? data[i] = (uint16_t) (word & 0xFFFF); // �??????? 16 �??????? if (i + 1 < length) { data[i + 1] = (uint16_t) ((word >> 16) & 0xFFFF); // �??????? 16 �??????? } user_save_flash += 4; // 每次读取后,移动到下�???????�??????? 32 位地�??????? } } union { uint16_t u16; uint8_t u8[2]; } u16_u8; void load_flash() { uint16_t data_array[10]; read_flash_u16(data_array, 10, FLASH_LAST_PAGE_512); set_register_range(20, 10, data_array); } _Bool check_ipv4(uint8_t ip[4]) { for (int i = 0; i < 4; i++) { if (ip[i] >= 255 || ip[i] == 0) { return 0; } } return 1; } //////////////////////////////////////////////////////////// ↓定时器(TIME6=1MS↓ ///////////////////////////////////////////// uint16_t timeout_beat, rtu_master_timeout, rstbtn_timeout, runbeat; void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) { if (htim == &htim6) { if (master.timeout < 0xffff) { master.timeout++; } if (slmpTimeout < 0xffff) { slmpTimeout++; } if (HAL_GPIO_ReadPin(rstbtn_GPIO_Port, rstbtn_Pin) == GPIO_PIN_RESET) { if (rstbtn_timeout < 0xffff) { rstbtn_timeout++; } else { rstbtn_timeout = 0; } } if (runbeat < 1000) { //控制运行指示灯间隔1秒闪烁 runbeat++; } else { runbeat = 0; HAL_GPIO_TogglePin(run_lamp_GPIO_Port, run_lamp_Pin); } } } uint16_t flash_reset[100]; void reset_button() { if (rstbtn_timeout > 3000) { memset(flash_reset, 0xFF, 200); Write_To_Flash_uint16(EDIT_FLASH_ADDRESS, flash_reset, 100); rstbtn_timeout = 0; } } //////////////////////////////////////////////////////////// ↑定时器↑ ///////////////////////////////////////////// //////////////////////////////////////////////////////////// ↓485主站↓ ///////////////////////////////////////////// void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) { if (huart == &huart1) { RE_RESET; HAL_UARTEx_ReceiveToIdle_DMA(&huart1, master.txbuf, 512); } } void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) { if (huart == &huart1) { master.rxdone = 1; master.rxsize = Size; } } //////////////////////////////////////////////////////////// ↑485主站↑ ///////////////////////////////////////////// int getBit(int num, int n) { return (num & (1 << n)) >> n; } void map_out(uint16_t startAddress) { out_word1 = get_register(startAddress); out_word2 = get_register(startAddress + 1); (getBit(out_word1, 0)) ? HAL_GPIO_WritePin(o1_GPIO_Port, o1_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o1_GPIO_Port, o1_Pin, GPIO_PIN_SET); (getBit(out_word1, 1)) ? HAL_GPIO_WritePin(o2_GPIO_Port, o2_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o2_GPIO_Port, o2_Pin, GPIO_PIN_SET); (getBit(out_word1, 2)) ? HAL_GPIO_WritePin(o3_GPIO_Port, o3_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o3_GPIO_Port, o3_Pin, GPIO_PIN_SET); (getBit(out_word1, 3)) ? HAL_GPIO_WritePin(o4_GPIO_Port, o4_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o4_GPIO_Port, o4_Pin, GPIO_PIN_SET); (getBit(out_word1, 4)) ? HAL_GPIO_WritePin(o5_GPIO_Port, o5_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o5_GPIO_Port, o5_Pin, GPIO_PIN_SET); (getBit(out_word1, 5)) ? HAL_GPIO_WritePin(o6_GPIO_Port, o6_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o6_GPIO_Port, o6_Pin, GPIO_PIN_SET); (getBit(out_word1, 6)) ? HAL_GPIO_WritePin(o7_GPIO_Port, o7_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o7_GPIO_Port, o7_Pin, GPIO_PIN_SET); (getBit(out_word1, 7)) ? HAL_GPIO_WritePin(o8_GPIO_Port, o8_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o8_GPIO_Port, o8_Pin, GPIO_PIN_SET); (getBit(out_word1, 8)) ? HAL_GPIO_WritePin(o9_GPIO_Port, o9_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o9_GPIO_Port, o9_Pin, GPIO_PIN_SET); (getBit(out_word1, 9)) ? HAL_GPIO_WritePin(o10_GPIO_Port, o10_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o10_GPIO_Port, o10_Pin, GPIO_PIN_SET); (getBit(out_word1, 10)) ? HAL_GPIO_WritePin(o11_GPIO_Port, o11_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o11_GPIO_Port, o11_Pin, GPIO_PIN_SET); (getBit(out_word1, 11)) ? HAL_GPIO_WritePin(o12_GPIO_Port, o12_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o12_GPIO_Port, o12_Pin, GPIO_PIN_SET); (getBit(out_word1, 12)) ? HAL_GPIO_WritePin(o13_GPIO_Port, o13_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o13_GPIO_Port, o13_Pin, GPIO_PIN_SET); (getBit(out_word1, 13)) ? HAL_GPIO_WritePin(o14_GPIO_Port, o14_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o14_GPIO_Port, o14_Pin, GPIO_PIN_SET); (getBit(out_word1, 14)) ? HAL_GPIO_WritePin(o15_GPIO_Port, o15_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o15_GPIO_Port, o15_Pin, GPIO_PIN_SET); (getBit(out_word1, 15)) ? HAL_GPIO_WritePin(o16_GPIO_Port, o16_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o16_GPIO_Port, o16_Pin, GPIO_PIN_SET); (getBit(out_word2, 0)) ? HAL_GPIO_WritePin(o17_GPIO_Port, o17_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o17_GPIO_Port, o17_Pin, GPIO_PIN_SET); (getBit(out_word2, 1)) ? HAL_GPIO_WritePin(o18_GPIO_Port, o18_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o18_GPIO_Port, o18_Pin, GPIO_PIN_SET); (getBit(out_word2, 2)) ? HAL_GPIO_WritePin(o19_GPIO_Port, o19_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o19_GPIO_Port, o19_Pin, GPIO_PIN_SET); (getBit(out_word2, 3)) ? HAL_GPIO_WritePin(o20_GPIO_Port, o20_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o20_GPIO_Port, o20_Pin, GPIO_PIN_SET); (getBit(out_word2, 4)) ? HAL_GPIO_WritePin(o21_GPIO_Port, o21_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o21_GPIO_Port, o21_Pin, GPIO_PIN_SET); (getBit(out_word2, 5)) ? HAL_GPIO_WritePin(o22_GPIO_Port, o22_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o22_GPIO_Port, o22_Pin, GPIO_PIN_SET); (getBit(out_word2, 6)) ? HAL_GPIO_WritePin(o23_GPIO_Port, o23_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o23_GPIO_Port, o23_Pin, GPIO_PIN_SET); (getBit(out_word2, 7)) ? HAL_GPIO_WritePin(o24_GPIO_Port, o24_Pin, GPIO_PIN_RESET) : HAL_GPIO_WritePin(o24_GPIO_Port, o24_Pin, GPIO_PIN_SET); } void map_in(uint16_t startAddress) { (HAL_GPIO_ReadPin(in1_GPIO_Port, in1_Pin) == 1) ? (in1_word &= ~(1 << 0)) : (in1_word |= (1 << 0)); (HAL_GPIO_ReadPin(in2_GPIO_Port, in2_Pin) == 1) ? (in1_word &= ~(1 << 1)) : (in1_word |= (1 << 1)); (HAL_GPIO_ReadPin(in3_GPIO_Port, in3_Pin) == 1) ? (in1_word &= ~(1 << 2)) : (in1_word |= (1 << 2)); (HAL_GPIO_ReadPin(in4_GPIO_Port, in4_Pin) == 1) ? (in1_word &= ~(1 << 3)) : (in1_word |= (1 << 3)); (HAL_GPIO_ReadPin(in5_GPIO_Port, in5_Pin) == 1) ? (in1_word &= ~(1 << 4)) : (in1_word |= (1 << 4)); (HAL_GPIO_ReadPin(in6_GPIO_Port, in6_Pin) == 1) ? (in1_word &= ~(1 << 5)) : (in1_word |= (1 << 5)); (HAL_GPIO_ReadPin(in7_GPIO_Port, in7_Pin) == 1) ? (in1_word &= ~(1 << 6)) : (in1_word |= (1 << 6)); (HAL_GPIO_ReadPin(in8_GPIO_Port, in8_Pin) == 1) ? (in1_word &= ~(1 << 7)) : (in1_word |= (1 << 7)); (HAL_GPIO_ReadPin(in9_GPIO_Port, in9_Pin) == 1) ? (in1_word &= ~(1 << 8)) : (in1_word |= (1 << 8)); (HAL_GPIO_ReadPin(in10_GPIO_Port, in10_Pin) == 1) ? (in1_word &= ~(1 << 9)) : (in1_word |= (1 << 9)); (HAL_GPIO_ReadPin(in11_GPIO_Port, in11_Pin) == 1) ? (in1_word &= ~(1 << 10)) : (in1_word |= (1 << 10)); (HAL_GPIO_ReadPin(in12_GPIO_Port, in12_Pin) == 1) ? (in1_word &= ~(1 << 11)) : (in1_word |= (1 << 11)); (HAL_GPIO_ReadPin(in13_GPIO_Port, in13_Pin) == 1) ? (in1_word &= ~(1 << 12)) : (in1_word |= (1 << 12)); (HAL_GPIO_ReadPin(in14_GPIO_Port, in14_Pin) == 1) ? (in1_word &= ~(1 << 13)) : (in1_word |= (1 << 13)); (HAL_GPIO_ReadPin(in15_GPIO_Port, in15_Pin) == 1) ? (in1_word &= ~(1 << 14)) : (in1_word |= (1 << 14)); (HAL_GPIO_ReadPin(in16_GPIO_Port, in16_Pin) == 1) ? (in1_word &= ~(1 << 15)) : (in1_word |= (1 << 15)); (HAL_GPIO_ReadPin(in17_GPIO_Port, in17_Pin) == 1) ? (in2_word &= ~(1 << 0)) : (in2_word |= (1 << 0)); (HAL_GPIO_ReadPin(in18_GPIO_Port, in18_Pin) == 1) ? (in2_word &= ~(1 << 1)) : (in2_word |= (1 << 1)); (HAL_GPIO_ReadPin(in19_GPIO_Port, in19_Pin) == 1) ? (in2_word &= ~(1 << 2)) : (in2_word |= (1 << 2)); (HAL_GPIO_ReadPin(in20_GPIO_Port, in20_Pin) == 1) ? (in2_word &= ~(1 << 3)) : (in2_word |= (1 << 3)); (HAL_GPIO_ReadPin(in21_GPIO_Port, in21_Pin) == 1) ? (in2_word &= ~(1 << 4)) : (in2_word |= (1 << 4)); (HAL_GPIO_ReadPin(in22_GPIO_Port, in22_Pin) == 1) ? (in2_word &= ~(1 << 5)) : (in2_word |= (1 << 5)); (HAL_GPIO_ReadPin(in23_GPIO_Port, in23_Pin) == 1) ? (in2_word &= ~(1 << 6)) : (in2_word |= (1 << 6)); (HAL_GPIO_ReadPin(in24_GPIO_Port, in24_Pin) == 1) ? (in2_word &= ~(1 << 7)) : (in2_word |= (1 << 7)); (HAL_GPIO_ReadPin(a1_GPIO_Port, a1_Pin) == 1) ? (in3_word &= ~(1 << 0)) : (in3_word |= (1 << 0)); (HAL_GPIO_ReadPin(b1_GPIO_Port, b1_Pin) == 1) ? (in3_word &= ~(1 << 1)) : (in3_word |= (1 << 1)); (HAL_GPIO_ReadPin(c1_GPIO_Port, c1_Pin) == 1) ? (in3_word &= ~(1 << 2)) : (in3_word |= (1 << 2)); (HAL_GPIO_ReadPin(e1_GPIO_Port, e1_Pin) == 1) ? (in3_word &= ~(1 << 3)) : (in3_word |= (1 << 3)); (HAL_GPIO_ReadPin(f1_GPIO_Port, f1_Pin) == 1) ? (in3_word &= ~(1 << 4)) : (in3_word |= (1 << 4)); (HAL_GPIO_ReadPin(g1_GPIO_Port, g1_Pin) == 1) ? (in3_word &= ~(1 << 5)) : (in3_word |= (1 << 5)); (HAL_GPIO_ReadPin(a2_GPIO_Port, a2_Pin) == 1) ? (in4_word &= ~(1 << 0)) : (in4_word |= (1 << 0)); (HAL_GPIO_ReadPin(b2_GPIO_Port, b2_Pin) == 1) ? (in4_word &= ~(1 << 1)) : (in4_word |= (1 << 1)); (HAL_GPIO_ReadPin(c2_GPIO_Port, c2_Pin) == 1) ? (in4_word &= ~(1 << 2)) : (in4_word |= (1 << 2)); (HAL_GPIO_ReadPin(e2_GPIO_Port, e2_Pin) == 1) ? (in4_word &= ~(1 << 3)) : (in4_word |= (1 << 3)); (HAL_GPIO_ReadPin(f2_GPIO_Port, f2_Pin) == 1) ? (in4_word &= ~(1 << 4)) : (in4_word |= (1 << 4)); (HAL_GPIO_ReadPin(g2_GPIO_Port, g2_Pin) == 1) ? (in4_word &= ~(1 << 5)) : (in4_word |= (1 << 5)); set_register_noSave(startAddress, in1_word); set_register_noSave(startAddress + 1, in2_word); set_register_noSave(startAddress + 2, in3_word); set_register_noSave(startAddress + 3, in4_word); } void Read_From_Flash(uint32_t startAddress, uint16_t *buffer, uint32_t numElements) { for (uint32_t i = 0; i < numElements; i++) { buffer[i] = *(__IO uint16_t*) (startAddress + (i * 2)); } } void combineMyRtumST() { for (int i = 0; i < 10; i++) { myRtumST[i * 2] = readST[i]; myRtumST[i * 2 + 1] = writeST[i]; } } /* USER CODE END 0 */ /** * @brief The application entry point. * @retval int */ int main(void) { /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ /* MCU Configuration--------------------------------------------------------*/ /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ HAL_Init(); /* USER CODE BEGIN Init */ /* USER CODE END Init */ /* Configure the system clock */ SystemClock_Config(); /* USER CODE BEGIN SysInit */ /* USER CODE END SysInit */ /* Initialize all configured peripherals */ MX_GPIO_Init(); MX_DMA_Init(); MX_SPI1_Init(); // MX_USART1_UART_Init(); MX_TIM6_Init(); /* USER CODE BEGIN 2 */ // 初始化保存数据 uint16_t readDataBuffer[FLASH_SAVE_SIZE]; Read_From_Flash(EDIT_FLASH_ADDRESS, readDataBuffer, FLASH_SAVE_SIZE); set_register_range(0, FLASH_SAVE_SIZE, readDataBuffer); //加载参数 slmp_port = get_register(85); slmp_ip[0] = get_register(81); slmp_ip[1] = get_register(82); slmp_ip[2] = get_register(83); slmp_ip[3] = get_register(84); if (slmp_ip[0] == 0xff || slmp_ip[1] == 0xff || slmp_ip[2] == 0xff || slmp_ip[3] == 0xff) { slmp_ip[0] = 192; slmp_ip[1] = 168; slmp_ip[2] = 1; slmp_ip[3] = 9; set_register(81, 192); set_register(82, 168); set_register(83, 1); set_register(84, 9); } if (slmp_port == 0xffff) { set_register(85, 4096); } if (get_register(91) == 0xffff) { set_register(91, 0); } commType = get_register(91); local_ip[0] = get_register(86); local_ip[1] = get_register(87); local_ip[2] = get_register(88); local_ip[3] = get_register(89); if (local_ip[0] == 0xff || local_ip[1] == 0xff || local_ip[2] == 0xff || local_ip[3] == 0xff) { local_ip[0] = 192; local_ip[1] = 168; local_ip[2] = 1; local_ip[3] = 14; set_register(86, 192); set_register(87, 168); set_register(88, 1); set_register(89, 14); } if (get_register(90) == 0xffff) { set_register(90, 120); } set_slaveid(get_register(90)); if (get_register(80) == 0xffff) { set_register(80, 0); } uint32_t BaudRate = 0; switch (get_register(80)) { // 80号地址波特率 case 0: BaudRate = 9600; break; case 1: BaudRate = 14400; break; case 2: BaudRate = 19200; break; case 3: BaudRate = 38400; break; case 4: BaudRate = 56000; break; case 5: BaudRate = 57600; break; case 6: BaudRate = 115200; break; default: BaudRate = 128000; break; } for (uint16_t i = 0; i < 80; i++) { if (get_register(i) == 0xffff) { set_register(i, 0); } } // 网页 httpServer_init(); reg_httpServer_cbfunc(NVIC_SystemReset, NULL); reg_httpServer_webContent((uint8_t*) "index.html", (uint8_t*) rtu_master); reg_httpServer_webContent((uint8_t*) "ajax.js", (uint8_t*) w5x00web_ajax_js); //初始化硬件 HAL_TIM_Base_Start_IT(&htim6); w5500_init(local_ip); MX_USART1_UART_Init(BaudRate); HAL_GPIO_WritePin(run_lamp_GPIO_Port, run_lamp_Pin, GPIO_PIN_RESET); combineMyRtumST(); updateMyRtumST(myRtumST); setupRtumST(readST, writeST); master.localSlaveId = get_slaveid(); /* USER CODE END 2 */ /* Infinite loop */ /* USER CODE BEGIN WHILE */ while (1) { /* USER CODE END WHILE */ /* USER CODE BEGIN 3 */ set_register(109, HAL_GPIO_ReadPin(run_lamp_GPIO_Port, run_lamp_Pin) ? 1 : 0); map_in(100); map_out(110); RTU_Master_Loop(&master, myRtumST); prev_cnt = comm_cnt; loopback_tcps_modbus(0, w5500_rx, 502, &comm_cnt, &comm1); if (slmp_send_loop < 2) { slmp_send_loop++; } else { slmp_send_loop = 0; if (commType == 0) { loopback_tcpc_slmp(1, slmp_ip, slmp_port, &comm_cnt, &comm2); } else if (commType == 1) { loopback_udpc_omrfins(1, slmp_ip, slmp_port, local_ip[3], &comm_cnt, &comm2); } } if (comm_cnt > 100) { HAL_GPIO_TogglePin(comm_lamp_GPIO_Port, comm_lamp_Pin); comm_cnt = 0; } if (!comm1 && !comm2) { HAL_GPIO_WritePin(comm_lamp_GPIO_Port, comm_lamp_Pin, GPIO_PIN_SET); } web_loop(); reset_button(); } /* USER CODE END 3 */ } /** * @brief System Clock Configuration * @retval None */ void SystemClock_Config(void) { RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; /** Initializes the RCC Oscillators according to the specified parameters * in the RCC_OscInitTypeDef structure. */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.HSEState = RCC_HSE_ON; RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; RCC_OscInitStruct.HSIState = RCC_HSI_ON; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { Error_Handler(); } /** Initializes the CPU, AHB and APB buses clocks */ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { Error_Handler(); } /** Enables the Clock Security System */ HAL_RCC_EnableCSS(); } /* USER CODE BEGIN 4 */ /* USER CODE END 4 */ /** * @brief This function is executed in case of error occurrence. * @retval None */ void Error_Handler(void) { /* USER CODE BEGIN Error_Handler_Debug */ /* User can add his own implementation to report the HAL error return state */ __disable_irq(); while (1) { } /* USER CODE END Error_Handler_Debug */ } #ifdef USE_FULL_ASSERT /** * @brief Reports the name of the source file and the source line number * where the assert_param error has occurred. * @param file: pointer to the source file name * @param line: assert_param error line source number * @retval None */ void assert_failed(uint8_t *file, uint32_t line) { /* USER CODE BEGIN 6 */ /* User can add his own implementation to report the file name and line number, ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ /* USER CODE END 6 */ } #endif /* USE_FULL_ASSERT */