114 lines
3.7 KiB
C
114 lines
3.7 KiB
C
/*
|
|
* @file s7tcpmaster.c
|
|
* @brief 西门子S7Comm TCP客户端主站实现
|
|
*
|
|
* 轮询机制: 和SLMP/FINS相同,使用myRtumST[20]
|
|
* - s7_idx: 0~19 轮转索引,对应 myRtumST[20]
|
|
* - **奇数索引**: 读操作,从PLC读取数据存储到 1000 + (idx*20) + i
|
|
* - **偶数索引**: 写操作,从 1000 + (idx*20) + i 读取数据写入PLC
|
|
* - 需要先建立TCP连接,然后完成COTP连接协商和S7Comm参数协商
|
|
* - 协商完成后进入正常轮询读写
|
|
*/
|
|
|
|
#include "s7tcpmaster.h"
|
|
#include "socket.h"
|
|
#include "wizchip_conf.h"
|
|
#include "rtuMaster.h"
|
|
#include "main.h"
|
|
#include <string.h>
|
|
|
|
static uint8_t buf[1024];
|
|
|
|
int32_t loopback_tcpc_s7(uint8_t sn,uint8_t *destip, uint16_t destport) {
|
|
int32_t ret; // return value for SOCK_ERRORs
|
|
uint16_t size = 0, sentsize = 0;
|
|
|
|
// Destination (TCP Server) IP info (will be connected)
|
|
// >> loopback_tcpc() function parameter
|
|
// >> Ex)
|
|
// uint8_t destip[4] = {192, 168, 0, 214};
|
|
// uint16_t destport = 5000;
|
|
|
|
// Port number for TCP client (will be increased)
|
|
static uint16_t any_port = 50000;
|
|
|
|
// Socket Status Transitions
|
|
// Check the W5500 Socket n status register (Sn_SR, The 'Sn_SR' controlled by Sn_CR command or Packet send/recv status)
|
|
switch (getSn_SR(sn)) {
|
|
case SOCK_ESTABLISHED:
|
|
if (getSn_IR(sn) & Sn_IR_CON) { // Socket n interrupt register mask; TCP CON interrupt = connection with peer is successful
|
|
#ifdef _LOOPBACK_DEBUG_
|
|
printf("%d:Connected to - %d.%d.%d.%d : %d\r\n", sn, destip[0], destip[1], destip[2], destip[3], destport);
|
|
#endif
|
|
setSn_IR(sn, Sn_IR_CON); // this interrupt should be write the bit cleared to '1'
|
|
}
|
|
|
|
//////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Data Transaction Parts; Handle the [data receive and send] process
|
|
//////////////////////////////////////////////////////////////////////////////////////////////
|
|
if ((size = getSn_RX_RSR(sn)) > 0) { // Sn_RX_RSR: Socket n Received Size Register, Receiving data length
|
|
if (size > 1024) {
|
|
size = 1024; // DATA_BUF_SIZE means user defined buffer size (array)
|
|
}
|
|
ret = recv(sn, buf, size); // Data Receive process (H/W Rx socket buffer -> User's buffer)
|
|
|
|
if (ret <= 0) {
|
|
return ret; // If the received data length <= 0, receive failed and process end
|
|
}
|
|
size = (uint16_t) ret;
|
|
sentsize = 0;
|
|
|
|
// Data sentsize control
|
|
while (size != sentsize) {
|
|
ret = send(sn, buf + sentsize, size - sentsize); // Data send process (User's buffer -> Destination through H/W Tx socket buffer)
|
|
if (ret < 0) { // Send Error occurred (sent data length < 0)
|
|
close(sn); // socket close
|
|
return ret;
|
|
}
|
|
sentsize += ret; // Don't care SOCKERR_BUSY, because it is zero.
|
|
}
|
|
}
|
|
//////////////////////////////////////////////////////////////////////////////////////////////
|
|
break;
|
|
|
|
case SOCK_CLOSE_WAIT:
|
|
#ifdef _LOOPBACK_DEBUG_
|
|
//printf("%d:CloseWait\r\n",sn);
|
|
#endif
|
|
if ((ret = disconnect(sn)) != SOCK_OK) {
|
|
return ret;
|
|
}
|
|
#ifdef _LOOPBACK_DEBUG_
|
|
printf("%d:Socket Closed\r\n", sn);
|
|
#endif
|
|
break;
|
|
|
|
case SOCK_INIT:
|
|
#ifdef _LOOPBACK_DEBUG_
|
|
printf("%d:Try to connect to the %d.%d.%d.%d : %d\r\n", sn, destip[0], destip[1], destip[2], destip[3], destport);
|
|
#endif
|
|
if ((ret = connect(sn, destip, destport)) != SOCK_OK) {
|
|
return ret; // Try to TCP connect to the TCP server (destination)
|
|
}
|
|
break;
|
|
|
|
case SOCK_CLOSED:
|
|
close(sn);
|
|
if ((ret = socket(sn, Sn_MR_TCP, any_port++, 0x00)) != sn) {
|
|
if (any_port == 0xffff) {
|
|
any_port = 50000;
|
|
}
|
|
return ret; // TCP socket open with 'any_port' port number
|
|
}
|
|
#ifdef _LOOPBACK_DEBUG_
|
|
//printf("%d:TCP client loopback start\r\n",sn);
|
|
//printf("%d:Socket opened\r\n",sn);
|
|
#endif
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return 1;
|
|
}
|
|
|