Files
stm32-comm/comm/protocols/modbustcpslave.h
T

83 lines
2.3 KiB
C

/**
* @file modbustcpslave.h
* @brief Modbus TCP从站服务头文件
*/
#ifndef MODBUSTCPSLAVE_H
#define MODBUSTCPSLAVE_H
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include <stdbool.h>
#ifndef DATA_BUF_SIZE
#define DATA_BUF_SIZE 2048
#endif
// ============================================================================
// 结构体定义
// ============================================================================
// RTU接收状态结构体
typedef struct {
uint8_t buf[512]; // 接收缓冲区
_Bool done; // 接收完成标志
uint16_t size; // 接收数据长度
} RtuRxST;
// ============================================================================
// 全局变量
// ============================================================================
extern uint8_t loopback_tcps_modbus_rxbuf[1024];
extern uint8_t loopback_tcps_modbus_txbuf[1024];
// ============================================================================
// 接口函数
// ============================================================================
/**
* @brief Modbus TCP服务主函数,W5500socket主循环处理
* @param sn: socket编号
* @param port: 监听端口 (通常502)
* @return 0/正表示正常,负表示错误
*/
int32_t loopback_tcps_modbus(uint8_t sn, uint16_t port);
/**
* @brief Modbus TCP转RTU转发,TCP -> RS485 -> TCP
* @param sn: socket编号
* @param buf: TCP接收缓冲区
* @param port: 监听端口
* @param timeout: 超时计数指针
* @param rtu_rx: RTU接收状态结构体
* @return 0/正表示正常,负表示错误
*/
int32_t loopback_tcps_modbus_to485(uint8_t sn, uint8_t *buf, uint16_t port, uint16_t *timeout, RtuRxST *rtu_rx);
/**
* @brief Modbus TCP转RTU格式转换
* @param tcp_buf: TCP输入缓冲区
* @param rtu_buf: RTU输出缓冲区
* @return RTU帧长度
*/
uint16_t tcp_to_rtu(uint8_t *tcp_buf, uint8_t *rtu_buf);
/**
* @brief Modbus RTU转TCP格式转换
* @param rtu_buf: RTU输入缓冲区
* @param tcp_buf: TCP输出缓冲区
* @param rtu_len: RTU帧长度
* @param rx_buf: 原TCP缓冲区(拷贝MBAP头)
* @return TCP帧长度,0表示CRC错误
*/
uint16_t rtu_to_tcp(uint8_t *rtu_buf, uint8_t *tcp_buf, uint16_t rtu_len, uint8_t *rx_buf);
#ifdef __cplusplus
}
#endif
#endif